« previous next »
Pages: [1]

Author Topic: ash board bow  (Read 2747 times)

0 Members and 1 Guest are viewing this topic.

Offline danny f

  • Member
  • Posts: 656
ash board bow
« on: June 22, 2012, 05:09:44 pm »
hi all, i have more or less completed my second bow, its sister stave from a piece of ash board. it is 55 pound at 28". i have put a yew riser, and yew and hawthorn tip overlays, the bow is finished with a few coats of medium brown wax polished up with fine wire wool. the pics arent great as its not stopped raining for 2 days. i will try and get a full draw and unbraced shot tomorrow. thanks for looking.




Logged

Offline rossfactor

  • Member
  • Posts: 805
  • Humboldt County CA
Re: ash board bow
« Reply #1 on: June 22, 2012, 05:54:27 pm »
Really even tiller! Good job.  Looks like there are some grain runoffs.  Is it pretty tight grained ash?

Gabe
Logged
Humboldt County CA.

Offline danny f

  • Member
  • Posts: 656
Re: ash board bow
« Reply #2 on: June 22, 2012, 05:58:56 pm »
cheers, this bow is an edge grain bow. the grain runs very straight and tight  down the back of the bow. i will try to get better pics tomorrow if this rain ever stops. :(
Logged

Offline rossfactor

  • Member
  • Posts: 805
  • Humboldt County CA
Re: ash board bow
« Reply #3 on: June 22, 2012, 07:55:28 pm »
Gotcha.  I dig the overlays as well.  Been thinking about using yew overlays on a piece of plumb I'm working on.

Gabe
Logged
Humboldt County CA.

Offline randman

  • Member
  • Posts: 647
Re: ash board bow
« Reply #4 on: June 22, 2012, 10:06:44 pm »
Dang Danny, your really addicted now! That's a fine bow, great bend, nice tips. Rossfactor, yew would be a good color for the inner layers of a multi layer overlay but it's much too soft for the final layer (your plum is much harder). I have used cut-offs of ocean spray for tip overlays. It's not extremely pretty but they don't call it ironwood for nothing.
Logged
Beauty is in the eye of the beer holder.

Offline lesken2011

  • Member
  • Posts: 2,063
  • Kenny
Re: ash board bow
« Reply #5 on: June 23, 2012, 09:52:07 am »
Nice job, Danny. I like those tips!
Logged
For by grace you have been saved through faith, and that not of yourselves; it is the gift of God, not of works, lest anyone should boast.

Ephesians 2:8-9

Kenny from Mississippi, USA

Offline ErictheViking

  • Member
  • Posts: 1,504
Re: ash board bow
« Reply #6 on: June 23, 2012, 11:33:46 am »
very nice tiller  on that.  should make for a smooth shooter
Logged
"He that but looketh on a plate of ham and eggs to lust after it hath already committed breakfast with it in his heart"  C.S. Lewis

Offline Sparrow

  • Member
  • Posts: 1,985
  • Who shot cock robin ? I said the sparrow.
    • Dream Fish Charters
Re: ash board bow
« Reply #7 on: June 23, 2012, 11:45:11 am »
That is a fine looking bow.Does it take any set ? I'd say you got that tiller spot on.  '  Frank
Logged
Frank (The Sparrow) Pataha, Washington

Offline H Rhodes

  • Member
  • Posts: 2,172
Re: ash board bow
« Reply #8 on: June 23, 2012, 11:54:38 am »
You got it now....  there should be some sort of bowyer's anonymous group near you, but there isn't.....  That is a good looking bow.   :)
Logged
Howard
Gautier, Mississippi

Offline danny f

  • Member
  • Posts: 656
Re: ash board bow
« Reply #9 on: June 23, 2012, 12:40:23 pm »
thanks everyone. yes  the bow has taken about 2" of set. i only have a couple of carbon arrows at the moment, and i think they are to light for the bow as they dont fly well but they definately go fast. :)
Logged

Offline toomanyknots

  • Member
  • Posts: 3,132
Re: ash board bow
« Reply #10 on: June 23, 2012, 03:16:03 pm »
Darn nice for a second bow. I would have no problem buying a bow like that, and if I didn't know it, I would never think it was only the second bow someone had ever made. Very nice job!
Logged
"The way of heaven is like the bending of a bow-
 the upper part is pressed down,
 the lower part is raised up,
 the part that has too much is reduced,
 the part that has too little is increased."

- Tao Te Ching, 77, A new translation by Victor H. Mair
Pages: [1]
« previous next »