« previous next »
Pages: [1]

Author Topic: Tillering a xbow prod?  (Read 892 times)

0 Members and 1 Guest are viewing this topic.

Offline Thesquirrelslinger

  • Member
  • Posts: 1,245
Tillering a xbow prod?
« on: April 21, 2013, 03:35:46 am »
Well, I want to make an all wooden xbow for fun. I intend it to be about 80 pounds with a 15 inch powerstroke. I have elm and red oak for making a prod.  I need to know how you would make and tiller such a bow.
Thanks,
Squirrel
Logged
"Insanity is doing the same thing over and over again and expecting different results"

Offline adb

  • Member
  • Posts: 5,339
Re: Tillering a xbow prod?
« Reply #1 on: April 21, 2013, 03:39:38 am »
I've made 3 xbow prods out of self yew. All hade an 8" power stroke, 3" brace height, and were 32-40" long. I made 1 with a rawhide backing. I made and tillered them the same as any other bow. Draw weights from 60-80#s. The last one I made had 1" of tip rise.
« Last Edit: April 21, 2013, 03:59:42 am by adb »
Logged
Pages: [1]
« previous next »