« previous next »
Pages: [1]

Author Topic: Long bow Leather grip material needed  (Read 2233 times)

0 Members and 1 Guest are viewing this topic.

kurogane_84

  • Guest
Long bow Leather grip material needed
« on: July 28, 2012, 12:32:18 am »
Hey all im looking for a replacement piece of leather for my bow, i cannot find any leather around my area, and im looking for either some Black leather or some of the same, a Dark chocolate brown, the measurements are 6 inches long by 6 inches wide, i have found some saw blades that i can make some knife blanks out of, if you have any let me know please
Logged

Offline TRACY

  • Member
  • Posts: 4,523
Re: Long bow Leather grip material needed
« Reply #1 on: July 28, 2012, 08:53:06 am »
Let me check and I'll get back to you tomorrow. I've got black(thin) and think I have the dark brown, but need to see. Got other colors as well- pink, purple, lime green, red, etc. Etc


Tracy
Logged
It is what it is - make the most of it!    PN500956

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: Long bow Leather grip material needed
« Reply #2 on: July 28, 2012, 11:11:24 am »
Old chairs,couches, coats, hand bags, purses, boots, wallets, ball gloves and such all conatin good leather. If worse comes to worse give them a try.
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline SlowPaw

  • Member
  • Posts: 23
    • Utah Mountain Man
Re: Long bow Leather grip material needed
« Reply #3 on: July 28, 2012, 12:31:09 pm »
I have some nice Buffalo in black, About 8oz.
Or antique Buffalo in a whiskey color (I can stain darker) in 4-5oz. I actually used this on my new bow and it turned out great. If you send me a email I can reply with a picture. SlowPaw@UtahMountainMan.com
I would be happy to share or trade for blade.

SlowPaw
Logged

kurogane_84

  • Guest
Re: Long bow Leather grip material needed
« Reply #4 on: July 28, 2012, 12:53:01 pm »
ok email sent, and send me a sketch of the blade profile youd like, i can only do the blanks right now, im not set up to do the full blade, dont have the tools LOL
Logged
Pages: [1]
« previous next »