« previous next »
Pages: [1]

Author Topic: steam straightening  (Read 2821 times)

0 Members and 1 Guest are viewing this topic.

Offline GaryR

  • Member
  • Posts: 200
steam straightening
« on: February 20, 2012, 07:39:24 pm »
I have a little rice cooker that gives a fair stream of steam. What would work better?
Gary
Logged

Offline Bevan R.

  • Member
  • Posts: 1,691
Re: steam straightening
« Reply #1 on: February 20, 2012, 07:58:19 pm »
I think you will burn up your rice cooke with the amount of time & steam needed.
Logged
Bowmakers are a little bent, but knappers are just plain flaky.

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: steam straightening
« Reply #2 on: February 20, 2012, 08:07:23 pm »
You  don't need much heat to straighten arrows. I use our gas kitchen stove.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline GaryR

  • Member
  • Posts: 200
Re: steam straightening
« Reply #3 on: February 20, 2012, 09:22:19 pm »
Pat, are saying just a little pan of boiling water will do it?
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: steam straightening
« Reply #4 on: February 20, 2012, 10:28:08 pm »
Dry heat with a little oil to prevent scorching.         I wouldn't use steam for arrows.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline GaryR

  • Member
  • Posts: 200
Re: steam straightening
« Reply #5 on: February 21, 2012, 12:42:21 am »
Dry heat even on green shoots?
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: steam straightening
« Reply #6 on: February 21, 2012, 02:12:00 am »
I bundle green shoots up for a few months before I use heat on them. What shoots are you using?   With sourwood you can remove the bark immediately and it won't check but most others that I know of check badly. You may be able to remove all the bark except for 2" at each end. I've heard that will keep them from checking. I would only try a few first to see.
  Another part of archery where patience is needed for best results.  ;)
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline GaryR

  • Member
  • Posts: 200
Re: steam straightening
« Reply #7 on: February 21, 2012, 06:33:28 pm »
Pat, I'm using Youpon holly. I hear its really hard to straighten when dry.
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: steam straightening
« Reply #8 on: February 21, 2012, 07:08:04 pm »
I think I'd use dry heat but leave the bark on. That will produce steam as the moisture under the bark heats. I've never tried youpon. It doesn't grow here and I didn't know better when I lived in Bluffton, SC.    I think Patrick(Jackcrafty) might have a build along in the "How To" section or you could PM him and ask how he straightens youpon.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline GaryR

  • Member
  • Posts: 200
Re: steam straightening
« Reply #9 on: February 21, 2012, 07:15:46 pm »
Pat, I may try one leaving the bark on with dry heat. I have been hitting Jackcrafty up for advice since I saw he used Youpon. I just wanted to give the guy a break. I did pm him, he told me about a couple devices that will work for steam straightening. I tried yesterday just laying it over a small pot of boiling water, with little luck. I just need to practice I'm sure. Thanks for your advice, you are always Johnny on the spot with answers. I just wish I had more to give back.
Gary
Logged

Offline JackCrafty

  • Global Moderator
  • Member
  • Posts: 5,628
  • Sorry Officer, I was just gathering "materials".
Re: steam straightening
« Reply #10 on: March 01, 2012, 02:40:19 pm »
I am going to make a video on steam straightening soon...
Logged
Any critter tastes good with enough butter on it.

Patrick Blank
Midland, Texas
Youtube: JackCrafty, Allergic Hobbit, Patrick Blank

Where's Rock? Public Waterways, Road Cuts, Landscape Supply, Knap-Ins.
How to Cook It?  200° for 24hrs then 275° to 500° for 4hrs (depending on type), Cool for 12hr

Offline GaryR

  • Member
  • Posts: 200
Re: steam straightening
« Reply #11 on: March 01, 2012, 09:29:53 pm »
I heat straightened a few with bark on and they are seasoning before I debark. I then bought a tea kettle and straightened a few without bark. Tea kettle works good. If the ones with bark on that took heat don't check, I'll be happy.
Gary
Logged
Pages: [1]
« previous next »