« previous next »
Pages: [1]

Author Topic: Urac  (Read 2289 times)

0 Members and 1 Guest are viewing this topic.

Offline vinemaplebows

  • Member
  • Posts: 1,419
Urac
« on: February 29, 2012, 08:30:39 pm »
Does Urac need exposure to the air to cure?? I typically wrap my bows in plastic, and need to know if there is air needed for curing????



Brian
Logged
Debating is an intellectual exchange of differing views...with no winners.

Offline crooketarrow

  • Member
  • Posts: 2,790
Re: Urac
« Reply #1 on: February 29, 2012, 08:53:36 pm »
  NOT SURE BUT IT WOULD SEAM SO.
Logged
DEAD IS DEAD NO MATTER HOW FAST YOUR ARROW GETS THERE
20 YEARS OF DOING 20 YEARS OF LEARNING 20 YEARS OF TEACHING

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,913
  • Eddie Parker
Re: Urac
« Reply #2 on: February 29, 2012, 09:01:19 pm »
Brian;

I've wrapped mine before and it has cured. I'm thinking it starts setting up because of a chemical reaction to the water.
Logged
Lakeland, Florida
 If you have to pull the trigger, is it really archery?

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: Urac
« Reply #3 on: February 29, 2012, 10:24:20 pm »
I know plenty that wrap and cure with no problems. I dont myself just because its more of a mess than I already make.
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline vinemaplebows

  • Member
  • Posts: 1,419
Re: Urac
« Reply #4 on: February 29, 2012, 11:39:17 pm »
Thanks! :)
Logged
Debating is an intellectual exchange of differing views...with no winners.

Offline Prarie Bowyer

  • Member
  • Posts: 1,599
Re: Urac
« Reply #5 on: March 01, 2012, 12:26:00 am »
The important thing is a little heat and the mix.  dont'be stingy on the powder.  If you are you can get a gummy mess that won't cure.  I had that issue with a glue job.  I was able to take a putty knife and heat gun and get my backing off the bow. 

All my bows are glued with Urac and all are completely wrapped up.

Note.  Sodium chloride is the active setting agent.  The brown powder is just walnut flower.  If you get raw sodium chloride you can get a "Clear Urac".  13:1 is the mix ratio of the Sodium Chloride. Basicaly a drop in enough glue with make a trilam.
Logged

Offline Onebowonder

  • Member
  • Posts: 1,495
Re: Urac
« Reply #6 on: March 01, 2012, 01:25:18 pm »
Sodium Cloride?  NaCl?  SALT???  Really?  ...and it's a liquid?  I'm trying to think of what sort of reaction would make that happen...
Logged

Offline Onebowonder

  • Member
  • Posts: 1,495
Re: Urac
« Reply #7 on: March 01, 2012, 01:27:37 pm »
OK, I just called Nelson's.  It's actually Ammonium Chloride that you want.  Salt will not work here...
Logged

Offline vinemaplebows

  • Member
  • Posts: 1,419
Re: Urac
« Reply #8 on: March 01, 2012, 01:29:18 pm »
Thanks....good info ;D
Logged
Debating is an intellectual exchange of differing views...with no winners.

Offline Prarie Bowyer

  • Member
  • Posts: 1,599
Re: Urac
« Reply #9 on: March 11, 2012, 05:00:13 pm »
Quote from: Onebowonder on March 01, 2012, 01:27:37 pm
OK, I just called Nelson's.  It's actually Ammonium Chloride that you want.  Salt will not work here...

Oops, yes.  Amonium Chloride. 
Logged

Offline NruJaC

  • Member
  • Posts: 54
    • Personal Blog
Re: Urac
« Reply #10 on: March 11, 2012, 08:17:40 pm »
Quote from: Onebowonder on March 01, 2012, 01:25:18 pm
Sodium Cloride?  NaCl?  SALT???  Really?  ...and it's a liquid?  I'm trying to think of what sort of reaction would make that happen...

NaCl dissolves in water pretty easily. It's pretty easy to make a Sodium Chloride solution. NH3Cl is similar.
Logged
Arjun from Reston, VA
Pages: [1]
« previous next »