Author Topic: Splinter repair help!!  (Read 7778 times)

0 Members and 1 Guest are viewing this topic.

Offline JW_Halverson

  • Member
  • Posts: 11,927
Re: Splinter repair help!!
« Reply #15 on: January 20, 2012, 11:28:59 pm »
Yeah, definitely let 'er rest until you can slap on the patch.  They don't heal on their own, sadly.
Guns have triggers. Bicycles have wheels. Trees and bows have wooden limbs.

Offline Eric Krewson

  • Member
  • Posts: 5,434
Re: Splinter repair help!!
« Reply #16 on: January 21, 2012, 11:52:03 am »
Serving thread soaked in superglue until it won't hold any more, bomb proof.


Offline JW_Halverson

  • Member
  • Posts: 11,927
Re: Splinter repair help!!
« Reply #17 on: January 21, 2012, 03:06:49 pm »
That photo trumps any thousand words I could come up with.
Guns have triggers. Bicycles have wheels. Trees and bows have wooden limbs.

Offline DraggingCanoe

  • Member
  • Posts: 27
Re: Splinter repair help!!
« Reply #18 on: January 23, 2012, 02:34:11 am »
I will definitely let it rest 'till I can get it fixed. I'm just waiting on payday right now.

Offline DraggingCanoe

  • Member
  • Posts: 27
Re: Splinter repair help!!
« Reply #19 on: January 30, 2012, 11:50:06 pm »
Would anybody care to weigh in on the fishing line suggestion? Anybody ever done it, because fishing line is something I have a LOT of.

Offline Bevan R.

  • Member
  • Posts: 1,691
Re: Splinter repair help!!
« Reply #20 on: January 30, 2012, 11:55:56 pm »
as long as it is a braded line it should work. wrap it tight and soak with superglue.
Bowmakers are a little bent, but knappers are just plain flaky.

Offline DraggingCanoe

  • Member
  • Posts: 27
Re: Splinter repair help!!
« Reply #21 on: January 31, 2012, 01:39:55 am »
ok, well that won't work then. All I've got is regular old line.

Offline JW_Halverson

  • Member
  • Posts: 11,927
Re: Splinter repair help!!
« Reply #22 on: January 31, 2012, 07:04:52 pm »
Monofillament won't work so good.  Spiderwire and those other superbraids will work just fine.  And plain old cotton sewing thread will do all you need to trap down a splinter once you have a good soaking of glue on it (doesn't even have to be superglue....wood glue works too).

If you are desperate, take a scrape of brown paper from an old paper bag, smear wood glue all over it and across the area around the splinter and smack it down like a patch.  Squeeze out any extra glue and air bubbles and let it dry.  Not pretty, not classy, but effective.
Guns have triggers. Bicycles have wheels. Trees and bows have wooden limbs.

Offline DraggingCanoe

  • Member
  • Posts: 27
Re: Splinter repair help!!
« Reply #23 on: January 31, 2012, 11:16:57 pm »
Well I just got the super glue yesterday (gorilla brand) so now I just have to wait two more weeks to get some thread. (that's how damn tight things are right now). Do you have to be quick about wrapping the thread while the glue in the splinter is still wet, or do you put pressure on the splinter until it dries and then wrap it and soak the thread?

Offline DraggingCanoe

  • Member
  • Posts: 27
Re: Splinter repair help!!
« Reply #24 on: February 16, 2012, 10:29:59 pm »
Well, I finally got around to doing it. Yesterday I superglued the splinter down and after it dried I wrapped it with a strip of rawhide with a coating of superglue after that dried, as a moisture barrier. I braced it and worked it a little, all the while watching the area for any movement and listening for warning cracks. One shot and it was alright. Two shots, good. So I put it through its paces today and everything is holding fine so far *knock on bow wood*. Though my shooting needs some work from not shooting for a month. Thanks a lot for all of your helpful advice.

Offline JW_Halverson

  • Member
  • Posts: 11,927
Re: Splinter repair help!!
« Reply #25 on: February 17, 2012, 02:50:53 am »
Yehaw!
Guns have triggers. Bicycles have wheels. Trees and bows have wooden limbs.

Offline DraggingCanoe

  • Member
  • Posts: 27
Re: Splinter repair help!!
« Reply #26 on: February 17, 2012, 08:15:42 pm »
exactly!  ;D