« previous next »
Pages: [1]

Author Topic: Hello All...  (Read 1298 times)

0 Members and 1 Guest are viewing this topic.

Offline bow101

  • Member
  • Posts: 2,235
Hello All...
« on: January 11, 2012, 08:14:43 pm »
I'm a newbie here....
I just got some FRee bow slat  :)Oak and Maple material today. It's mostly at 1.34 inches wide and about .210 thousands thick.
Is this allright for laminating..?
I wanted a full 2....2 1/4 inch but beggars cannot be choosy....lol..:)
Logged
"The privilege of a lifetime is being who you are."  Joseph Campbell

Offline soy

  • Member
  • Posts: 2,897
  • pm106221
Re: Hello All...
« Reply #1 on: January 11, 2012, 10:26:55 pm »
I have no experience with that, but some one here will...welcome to pa. ;D
Logged
Is this bow making a sickness? or the cure...

Offline tattoo dave

  • Member
  • Posts: 1,545
  • Rockford, MI
Re: Hello All...
« Reply #2 on: January 11, 2012, 10:36:36 pm »
Welcome to PA!! That should work just fine. Free is the best part. Use the maple as core, oak as backing. I'm no pro, but that would be my suggestion anyway. Be sure to get some pics in progress. I'm sure everybody here would be happy to help along the way. Again welcome!

Tattoo Dave
Logged
Rockford, MI

Offline bow101

  • Member
  • Posts: 2,235
Re: Hello All...
« Reply #3 on: January 12, 2012, 01:00:07 am »
Thanks Guys,
I'll try to post as much as possible....
I'm probably better to post in the HowTo's and Build-a-longs section..? Correct..?
Now that I sort know my way around.
Logged
"The privilege of a lifetime is being who you are."  Joseph Campbell

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Hello All...
« Reply #4 on: January 12, 2012, 02:07:39 am »
If you are building a bow, post it here in "Bows".  ;)
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC
Pages: [1]
« previous next »