Author Topic: Northwest prim bowmaking.  (Read 12979 times)

0 Members and 1 Guest are viewing this topic.

Offline Elktracker

  • Member
  • Posts: 1,964
  • Josh
Re: Northwest prim bowmaking.
« Reply #45 on: December 05, 2011, 02:57:50 pm »
I agree looks nice finished up! Nice paint job! I wouldnt mind the video on sinew glue, I always like videos on these subjects :D

Josh
my friends think my shops a mess, my wife thinks I have too much bow wood, my neighbors think im redneck white trash and they may all be right on the money!!

Josh Vance  Netarts OR. (Tillamook)

Offline sadiejane

  • Member
  • Posts: 1,030
Re: Northwest prim bowmaking.
« Reply #46 on: December 05, 2011, 03:22:30 pm »
as previosuly stated i did enjoy this video a great deal.
what really bums me out is the fact the original vids with homer are no longer available to view.
really bummed the owner of these vids made them private.
regardless of the methods used, they were a valuable resource.
and a delight to watch.
wish there was some way to contact the owner and ask them to reconsider...

btw the finished bow is might fine looking!
wild women don't get the blues

Offline Gus

  • Member
  • Posts: 1,829
  • It's Time To Make Some Shavings!
Re: Northwest prim bowmaking.
« Reply #47 on: December 05, 2011, 05:08:42 pm »
Love yewr Bow PaleoNinja!

And your video content and quality was Excellent!

As a new guy myself, I'd vote (YES!) to a Sinew Glue build along video!
Done a lot of reading on the subject but have yet to put it to the test.

Best Regards!

-gus
"I taught him archery everyday, and when he got good at it he throw an arrow at me."

Conroe, TX

Offline JW_Halverson

  • Member
  • Posts: 11,923
Re: Northwest prim bowmaking.
« Reply #48 on: December 05, 2011, 05:28:05 pm »
I still want to shoot that bow!  Nice paintjob.
Guns have triggers. Bicycles have wheels. Trees and bows have wooden limbs.

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,911
  • Eddie Parker
Re: Northwest prim bowmaking.
« Reply #49 on: December 05, 2011, 09:51:10 pm »
I really like that! I have a short yew stave and that's on my "to do" list.
Lakeland, Florida
 If you have to pull the trigger, is it really archery?

Offline osage outlaw

  • Member
  • Posts: 11,962
Re: Northwest prim bowmaking.
« Reply #50 on: December 06, 2011, 01:19:24 am »
That is a nice bow.  I would like to see a sinew glue video also.
I started out with nothin' and I still got most of it left

Offline Buckeye Guy

  • Member
  • Posts: 3,033
Re: Northwest prim bowmaking.
« Reply #51 on: December 06, 2011, 05:07:47 pm »
Just in case it interests anyone Gary Davis does a sinew demonstration every year at the Kalamazoo Mi. archery expo ! (Jan. 27-29 2012)
You can watch and get your questions answered by a very knowledgeable person !
Maybe I'll see ya there !
Guy
« Last Edit: December 06, 2011, 05:11:02 pm by Buckeye Guy »
Guy Dasher
The Marshall Primitive Archery Rendezvous
Primitive Archery Society
Having  fun
To God be the glory !

Offline PaleoNinja

  • Member
  • Posts: 41
Re: Northwest prim bowmaking.
« Reply #52 on: December 20, 2011, 03:01:06 am »
Hi Guys,
I managed to get my hands on a Chronometer in order to do some testing on the Yew Bow.

On the very first test shot I took, the Phragmites arrow I was using broke, because the Bale in the laboratory was very hard and I was shooting from close up.  So we only got one chrono reading with a 403 grain arrow.  We had taken shots on the chrono before and after and it was being consistent and reliable.  In the end the Bow came in at 40lbs at 20 inches, it still retains reflex when unstrung.

217 FPS  8)
« Last Edit: December 20, 2011, 03:04:08 am by PaleoNinja »

Offline Jude

  • Member
  • Posts: 286
  • Julian Benoit, Black River, NY & Kandahar, Afghan.
Re: Northwest prim bowmaking.
« Reply #53 on: December 20, 2011, 04:26:19 am »
I would point out that if Homer was the last surviving practitioner, and a good hundred years past when the craft was commonplace, it's a pretty easy assumption to make, that some construction details may have been lost.  In the small snippet of video where we do see him applying the dry sinew, into the thick glue, he seemed to be doing a good job keeping it straight.  I understand that Ishi dampened the sinew with saliva, which also wouldn't be as effective as soaking in glue, and wringing the bundle out.  I'm just saying that we, as people, forget how to do things pretty quickly after the practice of them falls out of fashion.  My own father grew up farming and logging with draft horses and  learned carpentry with no power tools; I remember watching him build double hung windows from scratch.  I barely know which end of a horse is which.
"Not all those that wander are lost."--Tolkien
"If at first you don't succeed, get a bigger hammer."--Benoit

Offline Justin Snyder

  • Administrator
  • Member
  • Posts: 13,794
Re: Northwest prim bowmaking.
« Reply #54 on: December 20, 2011, 10:04:40 pm »
I hate to be the barer of bad news, but your chronograph has problems. There are enough guys who have been building and testing thousands of bows for us to know that that speed isn't even close to possible with this bow. 165 would be miracle out of this bow and draw length. 150 would be more believable.
Everything happens for a reason, sometimes the reason is you made a bad decision.


SW Utah

Offline Marc St Louis

  • Administrator
  • Member
  • Posts: 7,877
  • Keep it flexible
    • Marc's Bows and Arrows
Re: Northwest prim bowmaking.
« Reply #55 on: December 20, 2011, 11:18:36 pm »
Even 150 would be hard to believe but then it's easy to overdraw when testing especially when you are testing a bow with a draw that is not your normal draw length.
Home of heat-treating, Corbeil, On.  Canada

Marc@Ironwoodbowyer.com

Offline Tortoise

  • Member
  • Posts: 162
Re: Northwest prim bowmaking.
« Reply #56 on: December 20, 2011, 11:49:42 pm »
That bow still fires nice, don't count on the sinews holding up though.
-Peter
Arizona