Author Topic: gar scale tip arrows  (Read 2601 times)

0 Members and 1 Guest are viewing this topic.

Offline thomas h

  • Member
  • Posts: 394
gar scale tip arrows
« on: November 02, 2011, 10:08:56 pm »
found some gar scales and  made three arrows the fly good out to about 15 yards or so then  sort of lose  interest  i think the scale is too light  may  have to add a  nail shaft on the next ones i think these would  make good rabbit  stabbers--




Offline fishfinder401

  • Member
  • Posts: 1,485
  • noel laflamme noellaf2@cox.net
Re: gar scale tip arrows
« Reply #1 on: November 02, 2011, 10:34:49 pm »
try making the fletching smaller by trimming a little of the height, they look a little big for the weight of the tips, other than that they look good.
noel
warbows and fishing, what else is there to do?
modern technology only takes you so far, remove electricity and then what

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,911
  • Eddie Parker
Re: gar scale tip arrows
« Reply #2 on: November 02, 2011, 10:38:09 pm »
 Or try a hardwood shoot with some more weight. It was my understanding they were used to stick people.
Lakeland, Florida
 If you have to pull the trigger, is it really archery?

Offline thomas h

  • Member
  • Posts: 394
Re: gar scale tip arrows
« Reply #3 on: November 02, 2011, 10:43:44 pm »
they are sharp :)

Offline JW_Halverson

  • Member
  • Posts: 11,923
Re: gar scale tip arrows
« Reply #4 on: November 02, 2011, 11:12:46 pm »
I think with lighter points you need more fletching to counteract the tendency to tumble.  With a heavy point, it naturally drags the tail along behind. 

Using your finger for a fulcrum, balance the arrow to see where the center of balance might lie.  When the center of balances shifts further foward the arrows tend to recover faster off the string and fly straighter as it slows. 
Guns have triggers. Bicycles have wheels. Trees and bows have wooden limbs.

Offline ken75

  • Member
  • Posts: 1,886
  • crepe myrtle is my "yella wood"
Re: gar scale tip arrows
« Reply #5 on: November 02, 2011, 11:58:43 pm »
thomas you could wrap behind the scale with copper hobby wire , its thin and cheap at wally world . that would add weight to the tip without hurting the penetration

Offline bowtarist

  • Member
  • Posts: 3,503
  • Primitive Archer Subscription Number PM103651
Re: gar scale tip arrows
« Reply #6 on: November 03, 2011, 02:00:13 am »
I was thinking copper wire.  You can get it at any hardware store, look in the picture hanging area if you're having trouble finding it.  My wife uses it for projects fairly regular.  All the advice above should be considered.  Are they tough?...like bone or what?
(:::.)    Osage music played daily. :)

Offline thomas h

  • Member
  • Posts: 394
Re: gar scale tip arrows
« Reply #7 on: November 03, 2011, 12:43:19 pm »
they are very tough  seem to be  like enamel covered bone

Offline GaryR

  • Member
  • Posts: 200
Re: gar scale tip arrows
« Reply #8 on: November 03, 2011, 01:18:14 pm »
Thomas, are they as is, meaning you didn't sharpen? How long do you expect them to hold up? Very cool, I'd heard of them being used but never saw it.
Gary

Offline thomas h

  • Member
  • Posts: 394
Re: gar scale tip arrows
« Reply #9 on: November 03, 2011, 01:43:32 pm »
the shape is as they come from the gar and they are harder than a bone point would be.

Offline Gus

  • Member
  • Posts: 1,829
  • It's Time To Make Some Shavings!
Re: gar scale tip arrows
« Reply #10 on: November 03, 2011, 03:15:46 pm »
Cool Thread...

-gus
"I taught him archery everyday, and when he got good at it he throw an arrow at me."

Conroe, TX

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,911
  • Eddie Parker
Re: gar scale tip arrows
« Reply #11 on: November 03, 2011, 09:07:18 pm »
 You should give Tarpon scales a try also. They are really big and thick. I've found some as big as a silver dollar buried 3' deep mixed in with artifacts on a lakeshore here in town. This lake is the headwaters of the Peace River which empties in the Gulf of Mexico 65 miles away.
Lakeland, Florida
 If you have to pull the trigger, is it really archery?

Offline Keenan

  • Member
  • Posts: 4,824
Re: gar scale tip arrows
« Reply #12 on: November 03, 2011, 10:14:36 pm »
If you have any cane for shafts you can use welding rod for tip inserts and adjust the weight to get them flying good. I had the same problems with some Great White shark tooth arrows that I made.

Offline thomas h

  • Member
  • Posts: 394
Re: gar scale tip arrows
« Reply #13 on: November 03, 2011, 10:44:11 pm »
thanks i have a few i can do that to. :)