Author Topic: white ash build along (finally done( this time for real))  (Read 63872 times)

0 Members and 1 Guest are viewing this topic.

Offline fishfinder401

  • Member
  • Posts: 1,485
  • noel laflamme noellaf2@cox.net
Re: white ash build along (finally done)
« Reply #135 on: August 07, 2011, 07:35:46 pm »
sorry about that time has been getting away from me this summer ;)
warbows and fishing, what else is there to do?
modern technology only takes you so far, remove electricity and then what

Offline fishfinder401

  • Member
  • Posts: 1,485
  • noel laflamme noellaf2@cox.net
Re: white ash build along (finally done)
« Reply #136 on: September 18, 2011, 03:21:17 am »
so...... ryoon wheres my money ;D
ill have full draw tomorrow when someone else is awake
btw, thank you again pat for the wood, this is my favorite bow right now, it shoots nice, little hand shock, fast and light, i haven't weighed it yet, but my guess is 80-90, the other day i shot it around 225 yards
thanks for the patience everyone and all the help, it really was invaluable
noel
warbows and fishing, what else is there to do?
modern technology only takes you so far, remove electricity and then what

Offline RyanY

  • Member
  • Posts: 1,999
Re: white ash build along (finally done)
« Reply #137 on: September 18, 2011, 03:29:12 am »
Nice job with the horn nocks. What kind of finish did you use? NO FULL DRAW?! That's the money shot!  ;D

Offline fishfinder401

  • Member
  • Posts: 1,485
  • noel laflamme noellaf2@cox.net
Re: white ash build along (finally done)
« Reply #138 on: September 18, 2011, 03:42:01 am »
i tried using a hand rubbed beeswax finish, but this summer went from close to 100 and humid on day to dry the next to oppressive humidity, and so on( we actually set a new high temp for my area)
thanks
noel
warbows and fishing, what else is there to do?
modern technology only takes you so far, remove electricity and then what

Offline toomanyknots

  • Member
  • Posts: 3,132
Re: white ash build along (finally done)
« Reply #139 on: September 18, 2011, 07:18:56 pm »
That looks really nice fish! You can almost divine the tiller from the braced profile. Really nice!
"The way of heaven is like the bending of a bow-
 the upper part is pressed down,
 the lower part is raised up,
 the part that has too much is reduced,
 the part that has too little is increased."

- Tao Te Ching, 77, A new translation by Victor H. Mair

Offline fishfinder401

  • Member
  • Posts: 1,485
  • noel laflamme noellaf2@cox.net
Re: white ash build along (finally done)
« Reply #140 on: September 18, 2011, 08:04:59 pm »
heres the full draw, this is to about 30ish, i don't like pulling the full 32 without an arrow, in case i go to far
warbows and fishing, what else is there to do?
modern technology only takes you so far, remove electricity and then what

Offline Elktracker

  • Member
  • Posts: 1,964
  • Josh
Re: white ash build along (finally done( this time for real))
« Reply #141 on: September 18, 2011, 10:03:46 pm »
Nice job Fish! I bet it shoots real nice! Well done!

Josh
my friends think my shops a mess, my wife thinks I have too much bow wood, my neighbors think im redneck white trash and they may all be right on the money!!

Josh Vance  Netarts OR. (Tillamook)

Offline Del the cat

  • Member
  • Posts: 8,322
    • Derek Hutchison Native Wood Self Bows
Re: white ash build along (finally done( this time for real))
« Reply #142 on: September 19, 2011, 08:05:23 am »
Nice tiller on that :).
Del
Health warning, these posts may contain traces of nut.

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: white ash build along (finally done( this time for real))
« Reply #143 on: September 21, 2011, 12:55:33 pm »
Noel, you have done good my friend. Keep it up!!!   8)
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline johnston

  • Member
  • Posts: 976
Re: white ash build along (finally done( this time for real))
« Reply #144 on: November 18, 2011, 02:31:07 am »
Noel, I did not realize you had really finished...excellent work ! I think the tiller turned out pretty good
and the horn nocks did too.Congratulations.

Lane


Offline fishfinder401

  • Member
  • Posts: 1,485
  • noel laflamme noellaf2@cox.net
Re: white ash build along (finally done( this time for real))
« Reply #145 on: November 18, 2011, 02:31:52 am »
thanks ;D
warbows and fishing, what else is there to do?
modern technology only takes you so far, remove electricity and then what

Offline JW_Halverson

  • Member
  • Posts: 11,923
Re: white ash build along (new full draw video added)
« Reply #146 on: November 18, 2011, 09:15:28 pm »
The problem with digging a big holeversion is transporting the hole, I tried carrying one in my car but it just fell through the floor ::)
Del

A friend in North Dakota had a welldriller go 1,800 ft deep without hitting water.  I bought the dry well, pulled it up and cut it in 24" lengths and sold it as brand new pre-dug post holes to some city folks, they never knew it was used hole!  I still have some left over and can sell lengths pretty cheap because they weigh next to nothing and are inexpensive to ship. 

Fishhead, nice bow.  I'd have never guessed white ash would hold up to that kind of draw weight!  Good for you!
Guns have triggers. Bicycles have wheels. Trees and bows have wooden limbs.