Primitive Archer
Welcome,
Guest
. Please
login
or
register
.
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
Home
Help
Search
Calendar
Login
Register
Primitive Archer
»
Main Discussion Area
»
Bows
»
urac or tb3
« previous
next »
Print
Pages: [
1
]
Author
Topic: urac or tb3 (Read 1742 times)
0 Members and 1 Guest are viewing this topic.
soy
Member
Posts: 2,897
pm106221
urac or tb3
«
on:
October 15, 2011, 12:18:24 am »
Just wondering witch is best for gluing on backing (wood to wood) urac 185 or tb3
Logged
Is this bow making a sickness? or the cure...
Pat B
Administrator
Member
Posts: 37,633
Re: urac or tb3
«
Reply #1 on:
October 15, 2011, 01:07:34 am »
Urac is THE BEST wood/wood glue!...but either will work for wood backings.
Logged
Make the most of all that comes and the least of all that goes! Pat Brennan Brevard, NC
missilemaster
Member
Posts: 1,172
Re: urac or tb3
«
Reply #2 on:
October 15, 2011, 01:52:33 am »
I just go done tillering and shooting a BBI I made and I used TB#. Worked just fine.
Cody W.
Logged
All men die, few men ever really live.
Real men love Jesus.
Prarie Bowyer
Member
Posts: 1,599
Re: urac or tb3
«
Reply #3 on:
October 15, 2011, 03:06:37 am »
I fell in love with URAC 183.
Don't add too little hardner and try to keep it in a warm place while curing. I use a hot box at about 140* for a few hours and it works like a charm. The best rate for it I have found is at 3Rivers. It's DIRT CHEAP through the maker Nelson paint BUT there is a shipping surcharge which kills the value unless you buy by the gallon.
If you want a more clear cure you can mix a little sodium chloride in water to create a slurry then add a few drops of that to the glue (13:1 ratio). The hardner it comes with is mostly walnut shell flour which helps with the gap filling.
I like how it smells. Not like an epoxy.
Logged
bubby
Member
Posts: 11,054
Re: urac or tb3
«
Reply #4 on:
October 15, 2011, 07:43:45 am »
I used to have trouble with tb setting up to fast unless it was just a flat bow, course here in the summer it's 112 deg. and dry as a bone, urac gives me al kinds of time to get everything assembled, Bub
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹
soy
Member
Posts: 2,897
pm106221
Re: urac or tb3
«
Reply #5 on:
October 16, 2011, 01:51:59 am »
Thanks for the help guys
Logged
Is this bow making a sickness? or the cure...
adb
Member
Posts: 5,339
Re: urac or tb3
«
Reply #6 on:
October 16, 2011, 12:47:55 pm »
I can't get URAC, so I use TB3 with no problems. The glue line is invisible, and it cleans up with water. It's also cheap, and readily available.
Logged
Justin Snyder
Administrator
Member
Posts: 13,794
Re: urac or tb3
«
Reply #7 on:
October 16, 2011, 05:01:44 pm »
Both are more than adequate. Each has its own quirks so I find it hard to switch from one to the other.
Logged
Everything happens for a reason, sometimes the reason is you made a bad decision.
SW Utah
Print
Pages: [
1
]
« previous
next »
Primitive Archer
»
Main Discussion Area
»
Bows
»
urac or tb3