« previous next »
Pages: [1]

Author Topic: Viburnum Arrows  (Read 2215 times)

0 Members and 1 Guest are viewing this topic.

Offline CherokeeKC

  • Member
  • Posts: 574
  • PM108323
Viburnum Arrows
« on: October 01, 2011, 11:08:41 pm »
Im still in process of making some viburnum arrows.  I wanted to try and heat straighten some small bends that are still in them.  Do I need to put some kind oil on them to keep from scorching the shafts?
Logged
Aim Small...Hit Small

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Viburnum Arrows
« Reply #1 on: October 02, 2011, 01:18:53 am »
I use cooking oil when I'm straightening any hardwood shoots and after final straightening I will come back, starting at one end and re-heat as you rotate and work out the shaft towards the other end. This will temper the shaft and you can add a little scorching to decoration. Once done I lay it flat until completely cool.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline crooketarrow

  • Member
  • Posts: 2,790
Re: Viburnum Arrows
« Reply #2 on: October 02, 2011, 01:29:26 am »
  I also use cooking oil. This year was the first time tempering them after straighting in the oven. I used oil here also. Worked really well. Give it a try.
Logged
DEAD IS DEAD NO MATTER HOW FAST YOUR ARROW GETS THERE
20 YEARS OF DOING 20 YEARS OF LEARNING 20 YEARS OF TEACHING
Pages: [1]
« previous next »