« previous next »
Pages: [1]

Author Topic: Bamboo sealer  (Read 1696 times)

0 Members and 1 Guest are viewing this topic.

Offline flungonin

  • Member
  • Posts: 302
Bamboo sealer
« on: October 14, 2011, 11:56:49 pm »
I have read on past posts that Spar Sealer increases the spine. Tru oil for a sealer/finish and then use a sealer. My question is what do you recommend for a bamboo shaft. Is Linseed oils any good. Laquer, shellac, verithane. I live on the East Coast (Virginia) and we get quite bit of rain. Any recommendations would would be appreciated. 
Logged

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: Bamboo sealer
« Reply #1 on: October 17, 2011, 06:09:55 pm »
I use Tung Oil or Tru Oil on mine. 2-3 coats seems to be fine.
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline artcher1

  • Member
  • Posts: 1,114
Re: Bamboo sealer
« Reply #2 on: October 17, 2011, 06:38:16 pm »
No finish is going to increase the spine.

Polyurethane is as good a finish as any. And those that Pearly mentioned also work very well. But for a quick finish, I use super glue on cane/boo shafts........Art
Logged

Offline CherokeeKC

  • Member
  • Posts: 574
  • PM108323
Re: Bamboo sealer
« Reply #3 on: October 17, 2011, 07:04:27 pm »
flungonin where do you live in VA?  Im in Chesterfield just south of Richmond but im about to move to Hampton Roads area.
Logged
Aim Small...Hit Small

Offline hillbilly61

  • Member
  • Posts: 893
  • Fly straight and true
Re: Bamboo sealer
« Reply #4 on: October 18, 2011, 12:52:19 am »
I like urethane (satin finish). I usually put 3 coates on
Logged
I will say of the Lord,"He is my refuge and my fortress;
  My God, in Him I will trust."  Psalm 91:2
Pages: [1]
« previous next »