« previous next »
Pages: [1]

Author Topic: TiteBond II and Sinew  (Read 3570 times)

0 Members and 1 Guest are viewing this topic.

Offline hillbilly61

  • Member
  • Posts: 893
  • Fly straight and true
TiteBond II and Sinew
« on: September 24, 2011, 11:00:13 am »
 Can TiteBond II be used to glue down sinew?
Logged
I will say of the Lord,"He is my refuge and my fortress;
  My God, in Him I will trust."  Psalm 91:2

Offline Prarie Bowyer

  • Member
  • Posts: 1,599
Re: TiteBond II and Sinew
« Reply #1 on: September 24, 2011, 11:36:32 am »
I'm almost positive I've seen a youtube video where a guy does this.  FYI, TB II and III can have their drying window extended by adding a FEW DROPS of water.  Don't add to much and "break" it.  I used to use thined TBIII as an edge treatment on MDO signs.


Logged

Offline rps3

  • Member
  • Posts: 1,514
Re: TiteBond II and Sinew
« Reply #2 on: September 24, 2011, 11:54:53 am »
I made a 54", 52#, at 27" draw sinewed osage using titebond. The bow has held its shape over 7 months and shoots great too. I am very happy with the results.
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: TiteBond II and Sinew
« Reply #3 on: September 24, 2011, 12:52:40 pm »
Any of the TB glues can be used with sinew but TBIII would be better because of it's moisture resistance.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

TurtleCreek

  • Guest
Re: TiteBond II and Sinew
« Reply #4 on: September 24, 2011, 02:57:08 pm »
  Ed Scott uses titebond  II to apply sinew in the Youtube video series "Bowmaking with Ed Scott Uncut" the videos are put on there by nmsugrants.  Great videos
Logged

Offline 4nolz

  • Member
  • Posts: 21
Re: TiteBond II and Sinew
« Reply #5 on: September 24, 2011, 03:11:10 pm »
how does it compare to titebonds hide glue?
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: TiteBond II and Sinew
« Reply #6 on: September 24, 2011, 03:27:23 pm »
Nolz, TB hide glue has an additive which shortens it's shelf life. If you use some that is out of date it takes forever to harden. Otherwise if it is fresh it should work well. I think I'd rather use granular hide glue or Knox gelatin.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline hillbilly61

  • Member
  • Posts: 893
  • Fly straight and true
Re: TiteBond II and Sinew
« Reply #7 on: September 24, 2011, 03:37:33 pm »
Thanks guys the responses were great

Pat...I'm pre planning this one ;D
Logged
I will say of the Lord,"He is my refuge and my fortress;
  My God, in Him I will trust."  Psalm 91:2

Offline toomanyknots

  • Member
  • Posts: 3,132
Re: TiteBond II and Sinew
« Reply #8 on: September 24, 2011, 03:47:37 pm »
I tryed it. I hated it. Mostly from the fact it takes forever to dry. (I used TB3 if it might have something to do with it.) It seems like it was even heavier than normal hide (or sinew) glue. I believe though that it was pointed out to me a way I could of did it to where it didn't take so long to dry. I think I might of layered too much tb on top as well. But thats my experience. And it did not reflex the way sinew backed bows normally reflex for me.
« Last Edit: September 24, 2011, 03:51:26 pm by toomanyknots »
Logged
"The way of heaven is like the bending of a bow-
 the upper part is pressed down,
 the lower part is raised up,
 the part that has too much is reduced,
 the part that has too little is increased."

- Tao Te Ching, 77, A new translation by Victor H. Mair

Offline JW_Halverson

  • Member
  • Posts: 11,923
Re: TiteBond II and Sinew
« Reply #9 on: September 24, 2011, 07:07:26 pm »
Yes you can use TBII/III.  Yes it provides a degree of protection against moisture.  BUT hide glue allows the sinew to shrink, pre-stress the back, and increase the performance of the bow.  I think TBII/III just prevents the back from lifting, stiffens the back, but the added weight improves the cast of the arrows as much as hide glue would.
Logged
Guns have triggers. Bicycles have wheels. Trees and bows have wooden limbs.

Offline MWirwicki

  • Member
  • Posts: 2,234
  • The wood speaks to you; Listen with your eyes. GSD
Re: TiteBond II and Sinew
« Reply #10 on: September 24, 2011, 10:19:42 pm »
But why?  Are you having a difficult time finding it?  If so, I can supply all that you would need.  It is in the granular form.  I'll trade you for something.  To me, if you are using natural sinew, then you should use a natural adhesive.  Sorry, just sayin'............
Logged
Matt Wirwicki
Owosso, MI

Offline crooketarrow

  • Member
  • Posts: 2,790
Re: TiteBond II and Sinew
« Reply #11 on: September 25, 2011, 01:53:09 am »
   I'm sure it will work because a long time back ( 20 years) I did one with ELMERS wood glue and it worked fine.
Logged
DEAD IS DEAD NO MATTER HOW FAST YOUR ARROW GETS THERE
20 YEARS OF DOING 20 YEARS OF LEARNING 20 YEARS OF TEACHING
Pages: [1]
« previous next »