Primitive Archer
Welcome,
Guest
. Please
login
or
register
.
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
Home
Help
Search
Calendar
Login
Register
Primitive Archer
»
Main Discussion Area
»
Bows
»
titebond for gluing up
« previous
next »
Print
Pages: [
1
]
Author
Topic: titebond for gluing up (Read 7792 times)
0 Members and 1 Guest are viewing this topic.
Lee Lobbestael
Member
Posts: 465
titebond for gluing up
«
on:
July 21, 2011, 07:37:57 pm »
I'm making a bamboo backed red oak r/d bow and am about to glue up. My question is can I use titebond to glue the bamboo to the red oak?
Logged
Bow Nut
Member
Posts: 253
Re: titebond for gluing up
«
Reply #1 on:
July 21, 2011, 07:47:21 pm »
I have heard of some success stories with tite bond and bamboo but have heard of more failed stories. Bamboo with my personal experience does not like titebond at all I tried one with titebond one time and it delaminated about half way through tillering. I have used urac and bow bond with 100 percent success and never one delamination failure. but like I said it has worked for some people. hickory backings on the other hand does much better than bamboo with titebond but either way my personal opinion is go with urac it is the best for wood to wood and with any wood.
Logged
SEMO_HUNTER
Member
Posts: 209
Southeast Mo. Redneck!!
Re: titebond for gluing up
«
Reply #2 on:
July 21, 2011, 08:18:49 pm »
I would suggest using a glue designed to take the stress of a bamboo backing and that glue is Urac. Don't frustrate yourself right from the git go by using the wrong glue for the job. I've never had a backing fail using Urac, just my 2 cents.
I have used Tite Bond II for handles and tips, but if you use TB glues you can't heat the wood to take out any camber or twist because the TB glues will release at around 150 deg.F so keep that in mind.
Logged
~Varitas Vos Liberabit~ John 8:32
PEARL DRUMS
Member
Posts: 14,079
}}}--CK-->
Re: titebond for gluing up
«
Reply #3 on:
July 21, 2011, 09:16:59 pm »
URAC for sure and be darn sure you thin that bamboo down very thin. The oak will chrysal like a bugger if you dont. Bamboo is very potent stuff.
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.
MWirwicki
Member
Posts: 2,234
The wood speaks to you; Listen with your eyes. GSD
Re: titebond for gluing up
«
Reply #4 on:
July 21, 2011, 09:53:48 pm »
So, where do you get Urac?
Logged
Matt Wirwicki
Owosso, MI
Pat B
Administrator
Member
Posts: 37,633
Re: titebond for gluing up
«
Reply #5 on:
July 21, 2011, 10:14:16 pm »
Nelson Paint Co. or 3Rivers
Logged
Make the most of all that comes and the least of all that goes! Pat Brennan Brevard, NC
mikekeswick
Guest
Re: titebond for gluing up
«
Reply #6 on:
July 22, 2011, 05:09:36 am »
I've had no problems at all with titebond iii, ever! Excellent glue and more than capable of holding together a bamboo backed bow. I have made knocking on for 100 bamboo backed laminates of many different designs and have used titebond iii for most of them. Another excellent glue would be resourcinol.
Coat both sides of the joint eg. bamboo and wood.
If using clamps DO NOT go mad with the pressure applied to joint.
If using inner tubes no worries wrap away - one clockwise and one anti-clockwise.
You should never need to heat a laminated bow anyway if you've choosen good wood and cut it straight? Any twist would be because it's not cut straight or wood removal hasn't been even.
Logged
Stingray45
Member
Posts: 330
Re: titebond for gluing up
«
Reply #7 on:
July 22, 2011, 12:06:09 pm »
I've never heard of using titebond with bamboo so I can't comment but I just recently did one bamboo backed hackberry with epoxy and another bamboo backed ash bow with gorilla glue. I saw a build-a-long on youtube where the guy used gorilla glue and it seemed to work pretty well. I haven't started tillering out the bows yet so I will report back on how it goes.
Logged
Is there anything better than wandering the earth with a stick and string in your hand?
Tower
Member
Posts: 2,298
Re: titebond for gluing up
«
Reply #8 on:
July 22, 2011, 02:15:21 pm »
I've only built one bow. It's a bamboo backed hickory bow & I used titebond3 . It has not given me any problems. There are 3 types of titebond glue and from what I've read #3 is better than the first two. But a more experienced builder may feel differently about it.
Logged
He who sacrifices freedom for a security deserves neither one. Benjamin Franklin!
hillbilly61
Member
Posts: 893
Fly straight and true
Re: titebond for gluing up
«
Reply #9 on:
July 22, 2011, 02:47:48 pm »
2 BBO, 1 BBH, and 3 BBI No failures and only use TBII. My philosophy is, if it can hold up the the Boo/IPE combonation, it's worth using. I do use the innertubes (thanks Rich) and they do better than clamps. plus they are easier to use
Logged
I will say of the Lord,"He is my refuge and my fortress;
My God, in Him I will trust." Psalm 91:2
Stingray45
Member
Posts: 330
Re: titebond for gluing up
«
Reply #10 on:
July 22, 2011, 03:57:15 pm »
Gotta agree with hillbilly on the intertubes. I went to it recently and it does a GREAT job of getting you even pressure to make sure you don't have any voids between backing and bow.
Logged
Is there anything better than wandering the earth with a stick and string in your hand?
Print
Pages: [
1
]
« previous
next »
Primitive Archer
»
Main Discussion Area
»
Bows
»
titebond for gluing up