Any difference between boiling and steaming?

[Badger]

      I have always wondered about using a little pressurized steam on some of the more stubborn woods, just putting ateam under 50# pressure will allow you to go up to 300 degrees. By putting on at least 2 pressure relief valves on a pipe and adjusting the flame so that the valves were just barely popping off i think it would work pretty well. But could be dangerous if someone didnt know what they were doing. Steve

[Justin Snyder]

Get an old pressure cooker and use the weight and safety pop off from the lid.  Justin

[Pat B]

You could just cut the offensive portion of the limb, drop it in the pressure cooker and turn it on.
     Pat