Author Topic: Bird cherry (prunus padus)  (Read 1599 times)

0 Members and 1 Guest are viewing this topic.

Offline dbb

  • Member
  • Posts: 745
Bird cherry (prunus padus)
« on: June 02, 2011, 07:10:22 pm »
I dont think this one grows in US but perhaps someone from GB or EU have tried it.
A buddy gonna take a big Bird cherry down in his yard,and of course i secured all that can be made into a bow ;D
The thing is i know next to nothing about it besides remembering reading somewhere it could make a good bow.
So any input is welcome.

/Mikael
It's better to ask and look like a fool than not to ask and remain one...

Offline dragonman

  • Member
  • Posts: 1,142
    • virabows.co.uk
Re: Bird cherry (prunus padus)
« Reply #1 on: June 02, 2011, 07:20:10 pm »
I live in uk. I made an ash backed bird cherry a few years ago  and it made a real nice bow , good compression for its weight, its pretty hard similar to oak but lighter in weight, took very little set and nice to work, wasnt confident enough not to back it but probablty would have been ok....?
'expansion and compression'.. the secret of life is to balance these two opposing forces.......

Offline dbb

  • Member
  • Posts: 745
Re: Bird cherry (prunus padus)
« Reply #2 on: June 03, 2011, 03:59:58 pm »
Thanks Dragonman!
Good to know.
Anything special on how to dry it? or is it like most whitewood,just glue,bark and split?

/Mikael
It's better to ask and look like a fool than not to ask and remain one...

Offline dragonman

  • Member
  • Posts: 1,142
    • virabows.co.uk
Re: Bird cherry (prunus padus)
« Reply #3 on: June 03, 2011, 04:21:41 pm »
same as other white woods, it splits much easier when green, when its dry the split tends to run off. when green splits very nicely, thats my experience anyway
« Last Edit: June 03, 2011, 04:59:05 pm by dragonman »
'expansion and compression'.. the secret of life is to balance these two opposing forces.......

Offline dbb

  • Member
  • Posts: 745
Re: Bird cherry (prunus padus)
« Reply #4 on: June 03, 2011, 06:26:25 pm »
Thanks  again Dragonman :)

/Mikael
It's better to ask and look like a fool than not to ask and remain one...