Author Topic: Pine longbow  (Read 17981 times)

0 Members and 1 Guest are viewing this topic.

Offline fishfinder401

  • Member
  • Posts: 1,485
  • noel laflamme noellaf2@cox.net
Re: Pine longbow
« Reply #15 on: March 30, 2011, 11:35:09 pm »
what do you think if i could use a stave of good quality pine for a longbow? i have 80 acres in Massachusetts with probably thousands of pines
noel
warbows and fishing, what else is there to do?
modern technology only takes you so far, remove electricity and then what

Offline Acutus

  • Member
  • Posts: 72
Re: Pine longbow
« Reply #16 on: March 30, 2011, 11:38:43 pm »
Looking forward to seeing your pics!! Been following this thread and sounds like you gotta nice bow outta the pine! I've always heard it couldn't be done or it'd have to be 4 inches wide! Good job!

Offline aznboi3644

  • Member
  • Posts: 802
Re: Pine longbow
« Reply #17 on: March 31, 2011, 12:00:07 am »
fish,
I don't see why a stave wouldn't work.  If you have probably have thousands of pines I'd search for compression pine staves for backed bows.  This pine is actually not that dense at all...pretty light and soft.  I'm sure you could find some suiteable pine staves.  It's very easy to work.



acutus,
thanks...I gotta put a handle wrap on this thing before I take any pics.

Offline JW_Halverson

  • Member
  • Posts: 11,927
Re: Pine longbow
« Reply #18 on: March 31, 2011, 12:30:11 am »
I keep expecting to check this thread and find the "aw crap" post, but it hasn't happened!  Cheers, mate!

And even if it turns out to be short lived, you are getting tillering experience and design experience for a lot less than an osage stave would cost you! 

I can get radiata pine here locally...growth rings up to 3/4 inch thick!  Might have to buy some of this stuff and try a pine longbow, too!  No guts, no glory.
Guns have triggers. Bicycles have wheels. Trees and bows have wooden limbs.

Offline bucksbuoy

  • Member
  • Posts: 116
Re: Pine longbow
« Reply #19 on: March 31, 2011, 12:56:29 pm »
I know pine bows have been built before so im not surprised. Souther yellow pine actually has a nice balance of tension and compression strength. Im sure it would make a fine bow, probably be fast too because its so light.
Jason
Its only wood

Offline aznboi3644

  • Member
  • Posts: 802
Updated with Full draw pictures
« Reply #20 on: April 02, 2011, 04:35:01 am »
Finished out low 40s I think...haven't weighed it yet.  I'll do that tomorrow.

Here she is braced at my fistmele which is right at 5.5"  Shoots well at that.


What the tips and nocks look like.  I am lazy and used some old tie on nocks I made out of broken arrow shafts.


Set right after unbracing on bottom limb


Top limb set.


And for the grand finally the full draw at 28".


I'll try and get some better full draw shots tomorrow afternoon.

I still gotta put a backing on this...the wood is really soft.  I was thinking of doing a paper backing.  Linen may be too heavy.  As for a finish I'm sealing it in bacon fat cured over a small fire.  And a handle wrap is to come later next week.

Offline Markus

  • Member
  • Posts: 183
Re: Pine longbow
« Reply #21 on: April 02, 2011, 12:51:47 pm »
Most interesting and a good job.  Markus.

Offline nativenoobowyer86

  • Member
  • Posts: 267
Re: Pine longbow
« Reply #22 on: April 05, 2011, 05:40:20 pm »
awesome thread :) i would love to try a pine bow, I live in Ontario, Canada where the growing season is short and the conifers have super fine rings.  the softwood lumber from this area is known for its strength, i would think that would transfer to bowmaking. 
"If it feels like ur life is about to fall apart, back it with some rawhide an hope it holds together"

Offline Jude

  • Member
  • Posts: 286
  • Julian Benoit, Black River, NY & Kandahar, Afghan.
Re: Pine longbow
« Reply #23 on: April 09, 2011, 05:07:38 am »
Pine can be incredibly elastic, given the right thickness.  It looks like you've figured out what that is.  That's a nice looking bow, and it's good cheap tillering practice.
I've always wondered how hemlock (Tsuga Canadensis, not the poisonous weed) would do,  If I remember correctly, the specific gravity is only about 0.45, but it was truly evil wood to frame with.  My dad would have it sawn into rough framing lumber and barn boards, saving our rare spruce and fir for planed finish boards.  Compared to lumberyard framing, it was heavy, stiff, and difficult to drive nails into.
"Not all those that wander are lost."--Tolkien
"If at first you don't succeed, get a bigger hammer."--Benoit

Offline Keenan

  • Member
  • Posts: 4,824
Re: Pine longbow
« Reply #24 on: April 09, 2011, 05:29:54 am »
 Nice bow and nice tiller. That is an accomplishment with pine. It is very soft and not very good for compression.  Be sure to watch for chrysalls on the belly. If there is the slightest tillering flaw it will show up as chrysalls on pine. However with the long length and great tiller you will probably be fine

Offline aznboi3644

  • Member
  • Posts: 802
Re: Pine longbow
« Reply #25 on: April 09, 2011, 04:33:04 pm »
thanks for the compliments guys...it was really fun making this bow.

tried my hardest to perfect the tiller cuz my last one chrysaled pretty easily...but surprisingly there are no chrysals.