Author Topic: Tip overlay silly question  (Read 1611 times)

0 Members and 1 Guest are viewing this topic.

Offline Birdman

  • Member
  • Posts: 12
Tip overlay silly question
« on: February 22, 2011, 11:32:37 pm »
I am making my first board bow.  i plan to back it with burlap.  Here is the silly question.  Do I back the bow first and then put on the overlays or do I overlay first and run the burlap backing up to the tip overlay?  I am  using deer antler for the tip overlays.

Offline Bevan R.

  • Member
  • Posts: 1,691
Re: Tip overlay silly question
« Reply #1 on: February 22, 2011, 11:36:07 pm »
Not a silly question. I have had the same question myself?.

Bevan
Bowmakers are a little bent, but knappers are just plain flaky.

Offline Ian Schmidt

  • Member
  • Posts: 12
Re: Tip overlay silly question
« Reply #2 on: February 22, 2011, 11:55:30 pm »
you should always glue the overlays onto the back of the bow. if not, it his hard to sand the fades in without messing up the backing. i dont think tips would adhere very well to most backings either.
"Call them wheels, or call them cams. I don't care. All I know is that the only wheels that should be killing deer are like the ones on my truck."

Offline profsaffel

  • Member
  • Posts: 420
Re: Tip overlay silly question
« Reply #3 on: February 22, 2011, 11:58:01 pm »
You are not going to want to put the tips over burlap. You should adhere the tips directly on the wood. Run the burlap up to the tips if you wish.

-Prof
Professor of History, Student of Bowyery

Offline Dauntless

  • Member
  • Posts: 282
Re: Tip overlay silly question
« Reply #4 on: February 23, 2011, 02:14:27 pm »
I've gotten away with the backing ending 6-8" from the tips three times now.  I kept those sections stiffer than the working limbs though.
The starving grad student with too many hobbies.

Offline Birdman

  • Member
  • Posts: 12
Re: Tip overlay silly question
« Reply #5 on: February 23, 2011, 04:35:40 pm »
Thanks for the responses!  I will place tips first then back the bow.