« previous next »
Pages: [1]

Author Topic: Thickness- To thick?  (Read 1322 times)

0 Members and 1 Guest are viewing this topic.

Offline DiGi

  • Member
  • Posts: 78
Thickness- To thick?
« on: February 20, 2011, 02:31:25 pm »
This is 13/16" thick, is it too thick? Do I need to take some off the belly for it to bend properly?
Logged

Offline Del the cat

  • Member
  • Posts: 8,322
    • Derek Hutchison Native Wood Self Bows
Re: Thickness- To thick?
« Reply #1 on: February 20, 2011, 03:14:12 pm »
Probably, but we need more info.
Is it an ELB (English Longbow) what whood is it, how long, what is your target draw length and weight.
If you provide that information, someone will be able to give you rough dimensions  for guidance.
Del
Logged
Health warning, these posts may contain traces of nut.

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Thickness- To thick?
« Reply #2 on: February 20, 2011, 03:16:11 pm »
Which way are you planning to bend it?  You would be better served if you leave a tip wider(3/4" to 1") until you get to low brace height. It helps to make adjustments after you brace the bow for the first time and  helps to keep things straighter when you have to bend wood also.
  What will be your ultimate tip measurements(Width and Thickness)?  What wood?
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline DiGi

  • Member
  • Posts: 78
Re: Thickness- To thick?
« Reply #3 on: February 20, 2011, 04:39:13 pm »
It's hickory, 72" long, my target draw weight is 50 lbs. , my draw is 28".
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Thickness- To thick?
« Reply #4 on: February 20, 2011, 04:42:02 pm »
You can get the tips down to 1/2" or slightly thicker.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC
Pages: [1]
« previous next »