« previous next »
Pages: [1]

Author Topic: heat treatment  (Read 1048 times)

0 Members and 1 Guest are viewing this topic.

Offline nugget

  • Member
  • Posts: 1,995
  • I see, I hunt, I shoot, I eat
heat treatment
« on: February 12, 2011, 10:14:44 pm »
I have made a black locust bow and have shot it some. Can I heat treat it and try to put some reflex in it? It has not been sealed or finished out. After seeing PatBs locust bow I was wanting to heat treat this one.
Logged
Life is not a journey to the grave with the intentions of arriving safely in a pretty and well preserved body. But rather to slide in sideways, thoroughly used up, totally worn out and loudly proclaiming....WOW WHAT A RIDE!!

Offline eflanders

  • Member
  • Posts: 53
Re: heat treatment
« Reply #1 on: February 12, 2011, 10:20:37 pm »
If it is a self-bow or one continuous piece of wood, yes.  Because of the high temperatures needed to properly temper the wood and/or form the wood, most glues will let go in a lamination.
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: heat treatment
« Reply #2 on: February 12, 2011, 10:42:53 pm »
TJ, I was pleased with the tempering I did on the locust Eastern Woodland bow I made. Locust seems to show color quicker than whitewoods. Toast it to a chocolate brown(belly only) and leave it in the form over night and give it a few days to rehydrate before stressing it. As long as the set isn't too severe it should hold some reflex.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline nugget

  • Member
  • Posts: 1,995
  • I see, I hunt, I shoot, I eat
Re: heat treatment
« Reply #3 on: February 12, 2011, 11:19:54 pm »
Thanks . The set is minimal and my plans are for mild reflex
Logged
Life is not a journey to the grave with the intentions of arriving safely in a pretty and well preserved body. But rather to slide in sideways, thoroughly used up, totally worn out and loudly proclaiming....WOW WHAT A RIDE!!
Pages: [1]
« previous next »