Author Topic: SUCCESS AT LAST  (Read 1981 times)

0 Members and 1 Guest are viewing this topic.

Offline sailordad

  • Member
  • Posts: 5,045
SUCCESS AT LAST
« on: February 06, 2011, 07:53:03 pm »
well i,like most other knappers,occaisonally try and make something thats a little more difficult
well more difficult for me at least
i have been trying,since i started this 2 years ago or so,to make a truly succensfull clovis style point
i have made many with one really nice flute
or wit httwoo flutes that are going off at angles and not straight down the blade
these "failed attempts" i usually turn into something else or give away(bevan got one recently  ;) )
well i wen out hunting this morning and when i came home i went donw to my winter knapping spot in the basement
first i finisihed up an ABO knapped obsidion knife blade
then i grabbed another piece of obsidion and reduced it with an moose billet
by time i had it reduced down to a preform it looked like cloved style blade
well i dont have many good antler tines for flaking and didnt want to mess this up
so i grabbed my copper tipped Ishi stick and did the pressure flaking and set up two median ridged(one on each face )
theni set up a nipple and grabbed my moose billet again and "WHACK"
made i nice straight flute on the first face
so back to the Ishi stick and set up a nipple on the other face
once again i grabbed the moose billet "WHACK"
i couldnt believe
i made a SECOND nice straight flute down the second face
i had never made two nice flutes on the same point before
after that i said "the heck with this,i am done for the day"
didnt want to ruin it so i didnt even put an edge on it yet
heres a pic of the clovis along with the all ABO knofe blade
hope ya'll can see the flutes  ;D





thanks for looking                                                                       tim
i always wanted a harley,untill it became the "thing to ride"
i ride because i love to,not to be part of the crowd

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,911
  • Eddie Parker
Re: SUCCESS AT LAST
« Reply #1 on: February 06, 2011, 07:56:16 pm »
 You did good, Tim. That's a long flute.
Lakeland, Florida
 If you have to pull the trigger, is it really archery?

Offline Bill Skinner

  • Member
  • Posts: 384
Re: SUCCESS AT LAST
« Reply #2 on: February 06, 2011, 10:39:31 pm »
And the moral of the story is...smack the snot out of it the first time.  When I was learning how to make a clovis, after I had broken a few, I would "love tap" my nipple and not get a flute but I would mess up my nipple.  I would have to rework the base, those first taps would mess up my ridge for just a little but I didn't want to lose more length soo...poor nipple, bad or no flute or even worse, good flute on one side and by the time I made corrections on the other, my flute would be damn near gone.  Finally, somebody said "It's just a rock, Hit it!"  So I did and it worked.  I still break one every now and then, it happens, but it happens a lot less.  Bill   

Offline jamie

  • Member
  • Posts: 2,387
  • born again pagan ,dirt worshipping heathen
Re: SUCCESS AT LAST
« Reply #3 on: February 07, 2011, 06:27:12 am »
good job tim  ;D
"Man is a tool-using animal. Without tools he is nothing, with tools he is all."

waterbury, ct

Offline Pappy

  • Global Moderator
  • Member
  • Posts: 32,204
  • if you have to ask you wouldn't understand ,Tenn.
Re: SUCCESS AT LAST
« Reply #4 on: February 07, 2011, 07:56:14 am »
Good looking point Tim,also blade. :)
   Pappy
Clarksville,Tennessee
TwinOaks Bowhunters
Life is Good

Offline JackCrafty

  • Global Moderator
  • Member
  • Posts: 5,628
  • Sorry Officer, I was just gathering "materials".
Re: SUCCESS AT LAST
« Reply #5 on: February 07, 2011, 12:07:39 pm »
Awesome!   ;D
Any critter tastes good with enough butter on it.

Patrick Blank
Midland, Texas
Youtube: JackCrafty, Allergic Hobbit, Patrick Blank

Where's Rock? Public Waterways, Road Cuts, Landscape Supply, Knap-Ins.
How to Cook It?  200° for 24hrs then 275° to 500° for 4hrs (depending on type), Cool for 12hr

Offline cowboy

  • Member
  • Posts: 7,035
  • Paul Wolfe. Springtown, TX
Re: SUCCESS AT LAST
« Reply #6 on: February 07, 2011, 01:13:19 pm »
Way to go Tim! I gotta get into that fluting stuff one of these days. And yes, I can see them flutes - no problem :).
When you come upon a track or trail you do not know, follow it to the point of knowing.

Offline swamp yeti

  • Member
  • Posts: 640
Re: SUCCESS AT LAST
« Reply #7 on: February 07, 2011, 02:01:10 pm »
Real nice.

JustinNC

  • Guest
Re: SUCCESS AT LAST
« Reply #8 on: February 07, 2011, 02:23:02 pm »
Awesome!

Offline Elktracker

  • Member
  • Posts: 1,964
  • Josh
Re: SUCCESS AT LAST
« Reply #9 on: February 08, 2011, 01:45:45 am »
Man thats really a nice job dad hope I get to that point soon, no pun intended lol
my friends think my shops a mess, my wife thinks I have too much bow wood, my neighbors think im redneck white trash and they may all be right on the money!!

Josh Vance  Netarts OR. (Tillamook)