« previous next »
Pages: [1]

Author Topic: Short maple self bow?  (Read 3613 times)

0 Members and 1 Guest are viewing this topic.

Offline Lee Lobbestael

  • Member
  • Posts: 465
Short maple self bow?
« on: January 31, 2011, 10:18:46 pm »
Hey guys! My brother wants me to make him a bow and he wants a short one. My question is, Does a hard maple 60" 45#@26 inches self bow sound feasible? Or is this to high stress for maple? I was thinking of backing it with rawhide maybe.
Logged

Offline half eye

  • Member
  • Posts: 3,300
Re: Short maple self bow?
« Reply #1 on: January 31, 2011, 10:32:38 pm »
Hey Lee,
      That would be doable without the backing, especially at that draw and weight. I've built some of my quartersawn bows in the mid 50's and actually had trouble getting the weight down to under 50#. Anyway, my experience says that's way possible.
rich
Logged

Offline beetlebailey1977

  • Member
  • Posts: 1,153
    • Bowhunters of South Carolina
Re: Short maple self bow?
« Reply #2 on: January 31, 2011, 10:43:44 pm »
And if anybody knows it would be Rich.  He has been there and done that.  Good advice from him.
Logged
Happy hunting to all!
Bowhunters of South Carolina Executive council member
Professional Bowhunters Society Associate member

Reevesville, SC     James V. Bailey II

Offline JW_Halverson

  • Member
  • Posts: 11,923
Re: Short maple self bow?
« Reply #3 on: January 31, 2011, 10:44:25 pm »
Maple from a stave?  No problem at all, overbuilt by a really safe factor.  Rawhide backed board bow?  Still no problem, as far as I can see.  Nice thing about Maple, it really responds to stains and oil finishes nicely, beautiful wood.
Logged
Guns have triggers. Bicycles have wheels. Trees and bows have wooden limbs.

Offline Lee Lobbestael

  • Member
  • Posts: 465
Re: Short maple self bow?
« Reply #4 on: January 31, 2011, 11:43:29 pm »
Thanks guys! I'll go ahead with it then
Logged
Pages: [1]
« previous next »