« previous next »
Pages: [1]

Author Topic: Length for sinew  (Read 1623 times)

0 Members and 1 Guest are viewing this topic.

Offline tetaxidermy

  • Member
  • Posts: 217
Length for sinew
« on: January 20, 2011, 03:51:20 pm »
How long is to long for a sinew backed osage? Right now I am at 60'' ntn. Thanks Eric
Logged
"Andy Dufresne: Get busy living, or get busy dying."
The Shawshank Redemption

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Length for sinew
« Reply #1 on: January 20, 2011, 03:54:36 pm »
It all depends on the draw length. The more stretch you get from the sinew, the more performance you get from the bow...to an extent. For a 28" draw, I think 60" or less is what you want.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline tetaxidermy

  • Member
  • Posts: 217
Re: Length for sinew
« Reply #2 on: January 20, 2011, 04:07:37 pm »
Thanks Pat, that's what I needed to know.
Logged
"Andy Dufresne: Get busy living, or get busy dying."
The Shawshank Redemption

Offline Kegan

  • Member
  • Posts: 2,676
Re: Length for sinew
« Reply #3 on: January 20, 2011, 04:43:12 pm »
For the record, I've backed a couple bows that were 66" or so but stopped short of the tips, about 10" short on each limb. The bows were reflexed and the outer limbs stiff and light. Never really pushed the design very far but the couple I did worked very well.
Logged
Pages: [1]
« previous next »