« previous next »
Pages: [1]

Author Topic: belt sander  (Read 2441 times)

0 Members and 1 Guest are viewing this topic.

Offline hugostead

  • Member
  • Posts: 5
belt sander
« on: December 31, 2010, 11:06:42 pm »
Someone who uses a belt sander in their bow making: what's a good brand? Thanks!
Logged

Offline half eye

  • Member
  • Posts: 3,300
Re: belt sander
« Reply #1 on: December 31, 2010, 11:19:20 pm »
hugostead,
       I got my belt sander as a gift, it's a Craftsman. I like it a lot.
rich
Logged

Offline osage outlaw

  • Member
  • Posts: 11,962
Re: belt sander
« Reply #2 on: December 31, 2010, 11:24:04 pm »
My wife bought me a new skill from Lowes $119.  I bought a used Ryobi off of craigslist for $25.  The Skill works, but the Ryobi is  much better.  I keep a rough belt on one and a smooth belt on the other and use both of them.
Logged
I started out with nothin' and I still got most of it left

Offline beetlebailey1977

  • Member
  • Posts: 1,153
    • Bowhunters of South Carolina
Re: belt sander
« Reply #3 on: December 31, 2010, 11:26:57 pm »
I not to long ago purchased a Porter Cable 4"x36" belt sander with the 8" disc.  So far so good but I have not used it yet for bow making.  It is a step up from the basic Ryobi and such.  It was $180 bucks from Lowes.
Logged
Happy hunting to all!
Bowhunters of South Carolina Executive council member
Professional Bowhunters Society Associate member

Reevesville, SC     James V. Bailey II

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: belt sander
« Reply #4 on: December 31, 2010, 11:34:33 pm »
I wore out a Craftsman 4x36 after many years of use. I now have a Grizzly 6x48 and it works great. I like having a disc sander attached too.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Bevan R.

  • Member
  • Posts: 1,691
Re: belt sander
« Reply #5 on: January 01, 2011, 12:05:12 am »
It has taken me about 15 years to wear out a delta bench. Took of the small disk cause it was in the way. Use it a bunch for rough shaping. Will get another bench maybe a bigger one to replace. Brand will depend on the check book at the time, but I will not shy away from another delta just because it is the cheepest.
Logged
Bowmakers are a little bent, but knappers are just plain flaky.

Offline Hillbilly

  • Member
  • Posts: 8,248
  • I like tater tots.
Re: belt sander
« Reply #6 on: January 01, 2011, 12:23:36 am »
I have a Hitachi that works well.
Logged
Smoky Mountains, NC

NeolithicHillbilly@gmail.com

Progress might have been all right once but it's gone on for far too long.

Offline hugostead

  • Member
  • Posts: 5
Re: belt sander
« Reply #7 on: January 01, 2011, 12:50:28 am »
Much thanks for your imputs guys! I went with Craftsman 6x48" belt sander with 9" disk. I'm really stoked. I'll have other questions about making arrows with a router jig, and best string to make, etc. Thanks!
Logged

Offline adb

  • Member
  • Posts: 5,339
Re: belt sander
« Reply #8 on: January 01, 2011, 01:00:59 am »
I use a Delta 6X48. No hiccups.
Logged

Grunt

  • Guest
Re: belt sander
« Reply #9 on: January 01, 2011, 09:39:55 am »
I have what Pat has, a Grizzly 6x48 and I use it on just about every bow I make. I can swap belts in 30 seconds.
Logged

Offline Bevan R.

  • Member
  • Posts: 1,691
Re: belt sander
« Reply #10 on: January 01, 2011, 01:32:17 pm »
All this got me wishing and low and behold, got a 25% off coupon in the e-mail from Habor.
Looked and they have a 6x48 with 9" disk marked down to $200. After the coupon and with shipping, just over $175.  :o
Now just waiting for the delivery O:)
Logged
Bowmakers are a little bent, but knappers are just plain flaky.
Pages: [1]
« previous next »