Author Topic: Strip or Grind  (Read 5242 times)

0 Members and 1 Guest are viewing this topic.

Offline iowabow

  • member
  • Member
  • Posts: 4,722
Re: Strip or Grind
« Reply #15 on: December 19, 2010, 01:27:13 pm »
I got deer tendon this morning from neighbor. What do you folks do with it at this point...cut it open and dry it or.........
(:::.) The ABO path is a new frontier to the past!

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Strip or Grind
« Reply #16 on: December 19, 2010, 01:34:19 pm »
It will dry as it is. Be sure all the meat and fat are off of them and just set them aside where they can dry. I put them on wax paper or foil and out of the way of critters.
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline iowabow

  • member
  • Member
  • Posts: 4,722
Re: Strip or Grind
« Reply #17 on: December 19, 2010, 01:44:55 pm »
thank you for the reply
(:::.) The ABO path is a new frontier to the past!

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Strip or Grind
« Reply #18 on: December 19, 2010, 02:49:31 pm »
You will know when they are dry when they are amber in color and hard as a rock! Once dry store them in a ziploc bag.
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline iowabow

  • member
  • Member
  • Posts: 4,722
Re: Strip or Grind
« Reply #19 on: December 19, 2010, 03:11:55 pm »
thank you Pat after dry do I hit them with a hammer to seperate the fibers?
(:::.) The ABO path is a new frontier to the past!

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Strip or Grind
« Reply #20 on: December 19, 2010, 03:38:04 pm »
If you are ready to use them now you can shread them while still "green". I would cut down the sheath that holds them together and soak them in warm water while pulling the bundle of fibers apart.
  If you dry them first you pound them until the fibers part then seperate with your hands. Using a rawhide or wooden mallet on a hardwood base will help protect the fibers but some folks use a ballpeen or other hammer on an anvil.
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline iowabow

  • member
  • Member
  • Posts: 4,722
Re: Strip or Grind
« Reply #21 on: December 19, 2010, 03:44:26 pm »
I need to make 6 arrow heads and finish the spine work on the arrows before I can use them so maybe I shoudl dry them first. Can they be frozen then used later.
(:::.) The ABO path is a new frontier to the past!

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Strip or Grind
« Reply #22 on: December 19, 2010, 05:28:30 pm »
They can be frozen but drying is just as easy.
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC