« previous next »
Pages: [1]

Author Topic: Stripping TruOil  (Read 1855 times)

0 Members and 1 Guest are viewing this topic.

PeteDavis

  • Guest
Stripping TruOil
« on: November 26, 2010, 09:56:06 am »


I am going to strip the Truoil finish from my Osage/Hickory and sand off a few pounds. Then glue in a little more handle.

What's a reliable solvent to remove the TruOil finish? The bow is glued with URAC 185.

Thanks in advance-PD
Logged

Offline Easternarcher

  • Member
  • Posts: 622
Re: Stripping TruOil
« Reply #1 on: November 26, 2010, 10:19:00 am »
Quote from: PeteDavis on November 26, 2010, 09:56:06 am


I am going to strip the Truoil finish from my Osage/Hickory and sand off a few pounds. Then glue in a little more handle.

What's a reliable solvent to remove the TruOil finish? The bow is glued with URAC 185.

Thanks in advance-PD

I just took a scraper to remove the finish on a bow I worked on for a friend to remove a bit of weight. Tru-Oil peeled off quite easy. Once work was done and I resanded and refinished with Tru-Oil again of course...can't tell it was ever in surgery!
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Stripping TruOil
« Reply #2 on: November 26, 2010, 10:20:51 am »
Pete, I just scrape off the Tru-Oil from the area I want to work on, do the work, sand that area smooth and feather out where it meets the existing Tru-oil and reapply. This is one reason I like Tru-Oil. It is very easy to make repairs.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline half eye

  • Member
  • Posts: 3,300
Re: Stripping TruOil
« Reply #3 on: November 26, 2010, 10:31:03 am »
Pete,
      I'm with Pat, the scraper and feather-edge sanding will work very well with the tru-oil.
rich
Logged
Pages: [1]
« previous next »