Author Topic: Processed Whitetail leg sinew  (Read 2901 times)

0 Members and 1 Guest are viewing this topic.

Offline flintstalker

  • Member
  • Posts: 6
Processed Whitetail leg sinew
« on: November 24, 2010, 04:14:13 am »
For trade-

Whitetail deer leg sinew.  I do the processing myself.  I have processed over 5,000 leg sinew in the past six years.  That's a lot of sinew!  I have also processed tons of backstrap sinew and the leg sinew is so much better.  I would take the pepsi challenge against it any day.  It's like silk.  Each piece is from the rear leg.  At minimum each tendon was 12 inches.  I'm most interested in flint or chert and atlatl dart shafts.

Offline shikari

  • Member
  • Posts: 167
Re: Processed Whitetail leg sinew
« Reply #1 on: November 24, 2010, 10:58:36 am »
I need about 150 grams and I have arrow shafts if you are interested.