« previous next »
Pages: [1]

Author Topic: hickory board bow  (Read 7065 times)

0 Members and 1 Guest are viewing this topic.

Offline DustinDees

  • Member
  • Posts: 192
  • the kingdom of bahrain, deployed
hickory board bow
« on: October 03, 2010, 01:51:55 am »
I got asked to do a bow recently for a boss. he has shot wheelie bows up untill recently he shot a friends long bow and was instantly hooked. i told him i could make him a decent flatbow and here she is. 65"  pulls 47@28  horn tips and zebra wood stripe in the riser. i dont have a pic of the brace height but its fistmelee* (spelling) and man does she sling em. As always criticism and critiques welcome, you dont improve if you dont hear em.





Thanks
Dustin D
Logged
“Do not spoil what you have by desiring what you have not; remember that what you now have was once among the things you only hoped for.” – Epicurus
Put your hand on a hot stove for a minute, and it seems like an hour. Sit with a pretty girl for an hour, and it seems like a minute. That's Relativit

Offline colejack3

  • Member
  • Posts: 47
Re: hickory board bow
« Reply #1 on: October 04, 2010, 05:49:01 pm »
THats nice :)
Logged

Offline Thwackaddict

  • Member
  • Posts: 543
Re: hickory board bow
« Reply #2 on: October 04, 2010, 09:57:06 pm »
thats a nice bow.very unique grip how long is the grip.Looks kinda compact and round.tips look excellent wish i could get mine that slick ;)
Logged
Hello everyone.My name is Randy and I am addicted to THWACK!!

Southwest,VA

PeteDavis

  • Guest
Re: hickory board bow
« Reply #3 on: October 04, 2010, 10:02:35 pm »


Nice.

Is it safe to remove that much wood at the pass and grip? Just asking.

PD
Logged

Offline half eye

  • Member
  • Posts: 3,300
Re: hickory board bow
« Reply #4 on: October 04, 2010, 10:44:28 pm »
Dustin,
     Well crafted bow, nice tiller, curious as to the wood....looks like what I use....quartersawn ash, oak, maybe? Just curious because your clear finish brought the grain out very nicely.
rich
Logged

Offline DustinDees

  • Member
  • Posts: 192
  • the kingdom of bahrain, deployed
Re: hickory board bow
« Reply #5 on: October 05, 2010, 12:46:09 am »
colejack3 thank you very much.

Thwackaddict thank you the riser is about 6.5" start of the fade up to the end.

PeteDavis thank you. I have done 2 of these risers before and have no prob with the grip. i leave it at least 2 times as thick as the thickest bending part of the limbs and never go less than half width, i figure with those specs it should hold about 4 times the draw with the formula given for tillering. 2 times as thick is 8 times stronger, 2 times width is 2 times stronger.

half eye thank you. The bow itself is from a hickory board the stripe in the riser is zebra wood. This has to be the shiniest bow i have made yet and the tru-oil definitely brings out the grain in all the woods i have used it on.

Thanks again,
Dustin D
Logged
“Do not spoil what you have by desiring what you have not; remember that what you now have was once among the things you only hoped for.” – Epicurus
Put your hand on a hot stove for a minute, and it seems like an hour. Sit with a pretty girl for an hour, and it seems like a minute. That's Relativit

Offline George Tsoukalas

  • Member
  • Posts: 9,425
    • Traditional and Primitive Archers
Re: hickory board bow
« Reply #6 on: October 05, 2010, 11:03:51 am »
Very nicely done! Congratulations on a fine bow. Jawge
Logged
Set Happens!
If you ain't breakin' you ain't makin!

Offline Steve Milbocker

  • Member
  • Posts: 447
Re: hickory board bow
« Reply #7 on: October 05, 2010, 11:24:48 am »
Nice Dustin.
Logged
I'm no where near as smart as my phone!

Offline Parnell

  • Member
  • Posts: 5,556
Re: hickory board bow
« Reply #8 on: October 05, 2010, 11:38:04 am »
That looks very nice - the tiller is very even.  I'm wondering about the cut out, do you have any trouble with the fletchingbeing compressed or hitting at that type of an angle?  I really like the zebrawood layer.  Nice bow!
Logged
1’—>1’

Offline Josh

  • Member
  • Posts: 3,367
  • Silence is golden but duct tape is silver.
Re: hickory board bow
« Reply #9 on: October 28, 2010, 10:56:01 pm »
Nice bow Dustin!  We'll look at it again in a few days for October BOM contest.  :)
Logged
“The trouble with quotes on the Internet is you never know if they are genuine.” —Abraham Lincoln

Offline Keenan

  • Member
  • Posts: 4,824
Re: hickory board bow
« Reply #10 on: October 28, 2010, 11:24:05 pm »
 Very nice Dustin. How about a close up of those nice looking tips.
Logged

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,911
  • Eddie Parker
Re: hickory board bow
« Reply #11 on: October 29, 2010, 12:03:32 am »
 Very nice bow, Dustin, your boss ought to be real proud to have such a gift. My only recommendation would be to bring the hand grip section of the riser higher, so the Index finger is as close to the shelf as you can get. This gives you more control and accuracy.
Logged
Lakeland, Florida
 If you have to pull the trigger, is it really archery?

Offline n2huntn

  • Member
  • Posts: 468
  • jeff_smith13@hotmail.com ROLL TIDE !
Re: hickory board bow
« Reply #12 on: October 29, 2010, 04:07:17 am »
 Beautiful
Logged
Genesis 27: 3

Offline TBod

  • Member
  • Posts: 275
Re: hickory board bow
« Reply #13 on: October 29, 2010, 03:04:28 pm »
Cool bow! Is the limbs pyramid shaped?

Like that tiller a lot, starts bending immediately out of the fades that takes skill to pull of.
Logged

Lombard

  • Guest
Re: hickory board bow
« Reply #14 on: October 29, 2010, 05:18:22 pm »
Love that tiller.
Logged
Pages: [1]
« previous next »