How do you flatten nodes?

[osage outlaw]

I bought some bamboo/cane from Lowes a while back.  I used my heat gun to get them fairly straight.  Now, what is the best way to flatten the nodes?

[Pat B]

There are at least 2 different schools here and both seem to work quite well as you will see.
  I prefer to straighten the cane first then I re-heat the nodes and roll them on a hard smooth surface with a block of hardwood. This compresses the nodes to almost the diameter of the internode.
  Others straighten their cane then sand the nodes smooth. Because you are removing the rind you should seal these cane shafts. Unsanded cane has it's own built in sealer.
  Note that in both cases the canes were straightened first then the nodes were dealt with. The node is the weal link in a cane arrow. If the sand first and try to straighten later the cane will generally break at a node.
  If the nodes are not too pronounced you don't have to do anything with them. Once drawn a properly spined arrow shouldn't touch the bow when released so a slightly pronounced node shouldn't effect the arrows flight. I have a few river cane arrows that Mechslasher gave me. The nodes are very proud and as the arrows are drawn they make noise on the side of the bow. Once released I never hear a sound.

[Hillbilly]

Belt sander.   But get them straight as possible before reducing the nodes. You can sand the nodes even and it won't weaken the arrow in use, but it'll make it a helluva lot easier to break while you're straightening it.

[osage outlaw]

Thanks for the info.  I tried to sand a few and then straighten them.  They all broke.  I will try to roll them flat first.

[El Destructo]

You don't roll them ...or Compress Them  First...They have to be Straightened First...then either Roll them...or Sand Them...If you do either before having them Straight...You are just asking for Failure....JMO

[osage outlaw]

I wrote that last post wrong.  I have straightened the ones that I have left.  Now I need to smooth the nodes.  I am still trying to find some rivercane.  I have spotted some behind somebody's house.  I also got a tip from some field guys from the water company about where I can find some.

[comebackshane]

I flattened my last batch with my wife's iron.  Just make sure to clean it really good before you put it back.

[El Destructo]

I traveled from the Texas Panhandle...all the way to Upper Michigan...and never seen a stalk of Cane in any State...I know I must have missed at least on nice Patch along the Way....