« previous next »
Pages: [1]

Author Topic: sidenocks and stave twists  (Read 1495 times)

0 Members and 1 Guest are viewing this topic.

Offline luke the drifter

  • Member
  • Posts: 171
sidenocks and stave twists
« on: August 18, 2010, 09:44:32 pm »
if a stave has a some twist on one end,  would having a sidenock pull the bow into alignment(?) when pulling to full draw?  just a general question?
Logged

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,911
  • Eddie Parker
Re: sidenocks and stave twists
« Reply #1 on: August 18, 2010, 09:56:40 pm »
 It will as long as the twist is not too bad. You can get it close to finish tiller and then get some of the twist out by using dry heat or steam and twisting it till it cools, also.
Logged
Lakeland, Florida
 If you have to pull the trigger, is it really archery?

Offline George Tsoukalas

  • Member
  • Posts: 9,425
    • Traditional and Primitive Archers
Re: sidenocks and stave twists
« Reply #2 on: August 18, 2010, 10:23:16 pm »
If the twist is natural and not caused by uneven wood removal and if the twist is minor ( <30 degrees) I would not worry about it. I never did a side nock. Can't anwer that question but made tons of bows out of staves with twists up to 40 degrees. Paid it no never mind. Jawge
Logged
Set Happens!
If you ain't breakin' you ain't makin!
Pages: [1]
« previous next »