« previous next »
Pages: [1]

Author Topic: self nock depths...  (Read 2746 times)

0 Members and 1 Guest are viewing this topic.

HatchA

  • Guest
self nock depths...
« on: July 15, 2010, 12:51:23 pm »
Quick question for those of you that shoot cane arrows with self nocks....  how deep is "deep enough" for self noccks, specifically in tonkin shafts?  I've got mine to about 5mm buut to my eye, they look kinda shallow.

Any thoughts?
Logged

Offline agd68

  • Member
  • Posts: 306
Re: self nock depths...
« Reply #1 on: July 15, 2010, 01:07:05 pm »
I cut mine to just a little deeper than the strings thickness at the nocking point
Logged
Happiness is..
A wet lab, dirty gun, and a cold beer after a day on the Marsh

Offline scattershot

  • Member
  • Posts: 161
Re: self nock depths...
« Reply #2 on: July 15, 2010, 01:08:14 pm »
I cut mine to the depth of a hacksaw blade, about 1/2".
Logged
"Experience is just a series of non-fatal mistakes"

Offline skyarrow

  • Member
  • Posts: 1,703
  • Sterling Lynch Victoria, TX (361)935-1715 text me
Re: self nock depths...
« Reply #3 on: July 15, 2010, 01:09:40 pm »
i have a mini table saw an i cut mine to the depth of the plastic ones
Logged
"We don't have mistakes here, we just have happy accidents" Bob Ross RIP 1995

Offline Hillbilly

  • Member
  • Posts: 8,248
  • I like tater tots.
Re: self nock depths...
« Reply #4 on: July 15, 2010, 10:25:03 pm »
I usually make mine about 3/8" or so.
Logged
Smoky Mountains, NC

NeolithicHillbilly@gmail.com

Progress might have been all right once but it's gone on for far too long.

Offline Diligence

  • Member
  • Posts: 362
Re: self nock depths...
« Reply #5 on: July 16, 2010, 01:00:24 am »
Mine are cut to 3/4 of the depth of a hacksaw blade....whatever that is....

j
Logged
"Always do your best and to everyone be kind and good" - Ernst Hjalmer Selin (1906-2000)....my grandfather's words of advice he wanted me to tell my children.

HatchA

  • Guest
Re: self nock depths...
« Reply #6 on: July 16, 2010, 08:16:16 am »
Wow, some varied repies ther but very much appreciated! I guess there's no set depth with sef nocks - just trial, error an personal preference.

Thanks guys.
Logged

Offline skyarrow

  • Member
  • Posts: 1,703
  • Sterling Lynch Victoria, TX (361)935-1715 text me
Re: self nock depths...
« Reply #7 on: July 19, 2010, 04:40:45 pm »
np
Logged
"We don't have mistakes here, we just have happy accidents" Bob Ross RIP 1995

Offline sailordad

  • Member
  • Posts: 5,045
Re: self nock depths...
« Reply #8 on: July 20, 2010, 11:02:19 pm »
i go half the shaft length,it gives me something to grab onto  ;D ;D :D jk lol

actually i go about 6mm deep
Logged
i always wanted a harley,untill it became the "thing to ride"
i ride because i love to,not to be part of the crowd
Pages: [1]
« previous next »