« previous next »
Pages: [1]

Author Topic: Point orientation  (Read 4196 times)

0 Members and 1 Guest are viewing this topic.

Offline zenmonkeyman

  • Member
  • Posts: 482
Point orientation
« on: May 25, 2010, 08:12:21 pm »
Since we're on the topic of arrows, I'm wondering what the voices of experience have to say about point orientation, specifically with stone or 2-blade designs.  Does planing during paradox cause problems with accuracy with vertical point orientation?  Is it better to have the points horizontal?
Logged
If the ppl ever allow private banks to control their currency, 1st by inflation, then by deflation, the banks & corporations that will grow up around (these banks) will deprive the ppl of all property until their children wake up homeless on the continent their fathers conquered. Thomas Jefferson

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,911
  • Eddie Parker
Re: Point orientation
« Reply #1 on: May 25, 2010, 08:18:32 pm »
 I like mine horizontal. It's a personal preference. I think is is a less distraction when I'm focussing on a shot. If it's a display arrow I mount them vertical.
Logged
Lakeland, Florida
 If you have to pull the trigger, is it really archery?

Offline youngbowyer33

  • Member
  • Posts: 606
Re: Point orientation
« Reply #2 on: May 25, 2010, 10:18:15 pm »
i don't have any experience but it was my understanding that it is supposed to go vertical in comparison to the string nock.
Logged
"All we have to decide is what to do with the time that is given to us"

Offline George Tsoukalas

  • Member
  • Posts: 9,425
    • Traditional and Primitive Archers
Re: Point orientation
« Reply #3 on: May 25, 2010, 11:01:30 pm »
Same as Mullet. Jawge
Logged
Set Happens!
If you ain't breakin' you ain't makin!

Offline sailordad

  • Member
  • Posts: 5,045
Re: Point orientation
« Reply #4 on: May 25, 2010, 11:20:04 pm »
me too, horizontal all the way
for the same reasons,less distraction
the way i shoot i need all the help i can get  ;)
Logged
i always wanted a harley,untill it became the "thing to ride"
i ride because i love to,not to be part of the crowd

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Point orientation
« Reply #5 on: May 26, 2010, 12:44:58 am »
For hafted points I cut the point slot the same orientation as the nock slot. Less confusing for me that way!  ::)  For glue on points I position them however they are when the arrow spins true. The direction is irrelevant IMO.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline billy

  • Member
  • Posts: 1,233
Re: Point orientation
« Reply #6 on: May 26, 2010, 01:13:13 am »
It doesn't really matter to me how my points are oriented.....but then again the points I usually shoot are small that they are tough to see anyway! 
Logged
Marietta, Georgia

Offline Pappy

  • Global Moderator
  • Member
  • Posts: 32,198
  • if you have to ask you wouldn't understand ,Tenn.
Re: Point orientation
« Reply #7 on: May 26, 2010, 06:48:29 am »
Same as Eddie. For the same reason.  :)
   Pappy
Logged
Clarksville,Tennessee
TwinOaks Bowhunters
Life is Good

Offline Hillbilly

  • Member
  • Posts: 8,248
  • I like tater tots.
Re: Point orientation
« Reply #8 on: May 26, 2010, 08:24:53 am »
I don't think it matters from a flight perspective-the arrow is going to start spinning almost as soon as it leaves the string, anyway. I've done them both ways, usually mount them vertically.
Logged
Smoky Mountains, NC

NeolithicHillbilly@gmail.com

Progress might have been all right once but it's gone on for far too long.

Offline Mechslasher

  • Member
  • Posts: 1,046
Re: Point orientation
« Reply #9 on: May 26, 2010, 10:22:48 am »
like mullet, i do mine horizontal.  with a vertical - wide two blade, planning might not be an issue but mounting it horizontal, it's one less thing to worry about.  i did notice the other day while practicing that one of my screw on heads came out vertical and at 25 yards the top edge of the broadhead is where arrow hit everytime.
Logged
"A liberal is someone who feels a great debt to his fellow man, which debt he proposes to pay off with your money." 

G. Gordon Liddy

Offline agd68

  • Member
  • Posts: 306
Re: Point orientation
« Reply #10 on: May 26, 2010, 01:20:48 pm »
Horizontal for all the same reasons
Logged
Happiness is..
A wet lab, dirty gun, and a cold beer after a day on the Marsh

Offline ozy clint

  • Member
  • Posts: 101
Re: Point orientation
« Reply #11 on: June 04, 2010, 08:08:25 am »
with carbons i mount them horizontal but with my woods and stone points i find i mount them vertical just because i cut the slots for the self nock and the point haft 90 degrees to the growth rings. this means they come out vertical.
Logged

Offline Bevan R.

  • Member
  • Posts: 1,691
Re: Point orientation
« Reply #12 on: June 04, 2010, 03:54:32 pm »
I like vertical. Then I use the back of the blade against my bowhand index finger as a draw reminder. Just my quirk it guess.
Logged
Bowmakers are a little bent, but knappers are just plain flaky.
Pages: [1]
« previous next »