Tiller help

[osage outlaw]

I could use a few fresh eyes on this osage tiller.  I am trying my best to get this bow to a shootable condition by this Saturday so I can take it to the Farmland traditional shoot in IN.  I have tried using the tillering gizmo, but this stave has some knots and dips, so it didn't help that much.  I have it braced to around 3 or 4 inches, and it is pulling 55# at 23".  I would like for it to end up 55# at 27", so I have a little room to work with.  The limbs are equal length.  Thanks for the help.

[Pat B]

Get both bending more from the first blue line back to the handle.

[osage outlaw]

So I should thin out the fades a little?

[Pat B]

Make each limb bend a little between the fades and the first blue line.

[Pappy]

Looks pretty good,looks like it has a little natural deflex in the handle,so I can't tell weather it is moving at the fads or not,looks a little stiff about mid lime on the right.The left looks pretty good.
Take a little off there and the fads ,just a little and move on out another inch. Looking pretty sweet so far. Show a picture of it un braced if you can.     
   Pappy

[osage outlaw]

Thanks for the help.  It does have some natural deflex to it.  I won't be able to post the unbraced picture until Thursday evening.  Hopefully I will have the tiller figured out by then.

[Mark Anderson]

I think I would work on the left fade and the right mid limb, but just ever so slightly. Looks pretty good though.
Mark

[osage outlaw]

I did some more scraping around the fades and made a proper string for it.  How does it look now?

Braced.



Full draw.  It is not centered with the blue lines, so the limbs aren't even with them.

[George Tsoukalas]

That really looks good. You may want to scrape just a bit off the fade on the left limb just to get the limbs to match.  I like to do that as much as possible though the presence of knots and other imperfections may prevent that. I'm nitpicking just to make a point. The tiller is excellent as is. Jawge