« previous next »
Pages: [1]

Author Topic: Urac  (Read 1559 times)

0 Members and 1 Guest are viewing this topic.

Offline NTD

  • Member
  • Posts: 1,771
Urac
« on: May 03, 2010, 11:37:27 pm »
Okay, got me some Urac.  I have a few questions.  I don't have a scale.  Any thoughts on how to measure it out? (lemme guess, Get a scale)  Also how much should I mix up for a single hickory backed glue up?  Don't want to waste it and I sure don't want to be left without enough to finish the job.
Logged
Nate Danforth

Offline NTD

  • Member
  • Posts: 1,771
Re: Urac
« Reply #1 on: May 04, 2010, 12:55:27 am »
Thanks for the reply Scott.  I guess you can be pretty liberal with how you mix it. 
Logged
Nate Danforth

Offline cowboy

  • Member
  • Posts: 7,035
  • Paul Wolfe. Springtown, TX
Re: Urac
« Reply #2 on: May 04, 2010, 12:56:50 am »
I've never used it but that the only way I've seen it measured.
Logged
When you come upon a track or trail you do not know, follow it to the point of knowing.

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Urac
« Reply #3 on: May 04, 2010, 01:42:41 am »
Mixing directions are on the can for weight or volume mixing.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline makenzie71

  • Member
  • Posts: 572
  • I can robin hood an arrow if I hit it just right.
Re: Urac
« Reply #4 on: May 04, 2010, 01:57:19 am »
Specifics aren't important...I use a shot glass to measure.  Just run 2:1.
Logged
Goodbye, friends. I never thought I'd die like this. But I always really hoped. ~ Fry

Offline NTD

  • Member
  • Posts: 1,771
Re: Urac
« Reply #5 on: May 04, 2010, 02:07:53 am »
Thank You Scott, That helps.
Logged
Nate Danforth

Offline dragonman

  • Member
  • Posts: 1,142
    • virabows.co.uk
Re: Urac
« Reply #6 on: May 04, 2010, 08:59:14 am »
Anyone know a urac seller who would post to the uk?
Logged
'expansion and compression'.. the secret of life is to balance these two opposing forces.......
Pages: [1]
« previous next »