« previous next »
Pages: [1]

Author Topic: How Do You Process Beaver Tail?  (Read 5529 times)

0 Members and 1 Guest are viewing this topic.

Offline El Destructo

  • Member
  • Posts: 8,078
  • Longhaired Crippled Hippie Biker And Proud Of It!!
    • Desert Sportz Primitive Archery
How Do You Process Beaver Tail?
« on: April 14, 2010, 02:05:07 pm »
I got two Beaver this last weekend...and I have no clue on how to process the Tail....I want to use it for Grips on Bows....These were some massive Critters too....the one air kept weighs just under 60 pounds....man what a Beast....the other went to myHunting Buddy
Logged
As a species we're fundamentally insane. Put more than two of us in a room, we pick sides and start dreaming up ways to kill one another.Why do you think we invented politics and religion.
Think HEALTHCARE Is Expensive Now,Wait Till It's FREE
Do Or Do Not,There Is No TRY
2024...We Will Overcome

Offline DanaM

  • Member
  • Posts: 9,211
Re: How Do You Process Beaver Tail?
« Reply #1 on: April 14, 2010, 02:22:13 pm »
Not sure Mike skin it scrape it, and dry it on a board I guess ???
Jeff Utley asked the same thing he ssid there a real booger to flesh.
Logged
"Prosperity is a way of living and thinking, and not just money or things. Poverty is a way of living and thinking, and not just a lack of money or things."

Manistique, MI

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,911
  • Eddie Parker
Re: How Do You Process Beaver Tail?
« Reply #2 on: April 14, 2010, 02:26:34 pm »
 If it's like an Otter tail, it's a chore to flesh it and degrease it. Have some GoJo on hand.
Logged
Lakeland, Florida
 If you have to pull the trigger, is it really archery?

Offline zenmonkeyman

  • Member
  • Posts: 482
Re: How Do You Process Beaver Tail?
« Reply #3 on: April 14, 2010, 03:35:57 pm »
El D, can you do a Tail Along while you figure it out?  I'm sure I'm not the only one who'd like to see how it's done (or how it's not done, if there are mistakes to be avoided, maybe you'll find out what they are for the rest of us  ;D )
Logged
If the ppl ever allow private banks to control their currency, 1st by inflation, then by deflation, the banks & corporations that will grow up around (these banks) will deprive the ppl of all property until their children wake up homeless on the continent their fathers conquered. Thomas Jefferson

Offline Ryano

  • Member
  • Posts: 3,578
  • Ryan O'Sullivan, North Western Pennsylvania
Re: How Do You Process Beaver Tail?
« Reply #4 on: April 14, 2010, 06:44:05 pm »
Mike skin it like a fish and just scrape as much fat/grizzle off of it as you can then tack it to a board or use a staple gun....salt it and let it dry. You will have to thin it in certain area's after its dry. I use a belt sander for that.... Then all you have to do is wet it and glue it on green like a snake skin. Hope this helps.
Logged
Its November, I'm gone hunt'in.......
Osage is still better.....

Offline Outbackbob48

  • Member
  • Posts: 2,752
Re: How Do You Process Beaver Tail?
« Reply #5 on: April 14, 2010, 09:42:01 pm »
El D, here's a picture of mine done just like Ryano says. Thanks for lookin Bob

[attachment deleted by admin]
Logged

Offline El Destructo

  • Member
  • Posts: 8,078
  • Longhaired Crippled Hippie Biker And Proud Of It!!
    • Desert Sportz Primitive Archery
Re: How Do You Process Beaver Tail?
« Reply #6 on: April 14, 2010, 10:22:46 pm »
Thanks Ryan....didn't know if that would work with Hide...but I guess it would be no different than laying out Rawhide.....Appreciate the help..... I am going to tan the Hide also....to beautiful to waste....may have to eat this Beaver too...... :P

Thanks Outback...thats what I am hoping mine will look like when done also...
Logged
As a species we're fundamentally insane. Put more than two of us in a room, we pick sides and start dreaming up ways to kill one another.Why do you think we invented politics and religion.
Think HEALTHCARE Is Expensive Now,Wait Till It's FREE
Do Or Do Not,There Is No TRY
2024...We Will Overcome

Offline Justin Snyder

  • Administrator
  • Member
  • Posts: 13,794
Re: How Do You Process Beaver Tail?
« Reply #7 on: April 14, 2010, 11:53:36 pm »
Beaver tastes great Mike. If you can fillet a fish you can handle a beaver tail. I did it like Ryan said. The real shame is how many beaver tails I threw away before I started building bows. The water conservancy paid me $30 each to kill everything I could in about 30 miles of creek. They even got me permission to trap the indian reservation. I killed about 100 in one spring.
Logged
Everything happens for a reason, sometimes the reason is you made a bad decision.


SW Utah

Offline juniper junkie

  • Member
  • Posts: 714
Re: How Do You Process Beaver Tail?
« Reply #8 on: April 15, 2010, 01:41:56 am »
so Bob, did you just salt and dry the tail and then glue it on the bow? I have some tails I was going to tan, but maybe just moistening and glueing would be better? I spent a lot of my younger years chasing beaver ;)
Logged

Offline Parnell

  • Member
  • Posts: 5,556
Re: How Do You Process Beaver Tail?
« Reply #9 on: April 15, 2010, 03:54:09 pm »
Candle light and a bottle of wine?  Couldn't resist. >:D
Logged
1’—>1’

Offline Outbackbob48

  • Member
  • Posts: 2,752
Re: How Do You Process Beaver Tail?
« Reply #10 on: April 15, 2010, 06:37:31 pm »
Juniper, I just skinned it a close as possible then fleshed an tacked out till dry. When i got ready to put on bow I soaked in water an did alot of shaping. My handle is bulbulous so had todo alot of stretching an shaping. I sewed mine in the front but if i did it again i would punch holes an lace . Keep it pretty close fit it won't shrink alot. Oh I did use glue also. Once it dryed it was like hard shoe leather. Trapping it was the fun part the rest is all work. Good Luck Later Bob
Logged

Offline HoBow

  • Member
  • Posts: 1,439
  • The choices we make dictate the lives we lead.
Re: How Do You Process Beaver Tail?
« Reply #11 on: April 15, 2010, 07:22:53 pm »
I gave up and threw them in a bag of salt ;D My experience was not as easy as filleting a fish...
Logged
Jeff Utley- Atlanta GA

Offline DanaM

  • Member
  • Posts: 9,211
Re: How Do You Process Beaver Tail?
« Reply #12 on: April 15, 2010, 08:01:09 pm »
Jeff did ya try wine and candlelight :P
Logged
"Prosperity is a way of living and thinking, and not just money or things. Poverty is a way of living and thinking, and not just a lack of money or things."

Manistique, MI

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,911
  • Eddie Parker
Re: How Do You Process Beaver Tail?
« Reply #13 on: April 15, 2010, 08:12:22 pm »
 I've been restraining myself, Steve. :P ::) ;D ;)
Logged
Lakeland, Florida
 If you have to pull the trigger, is it really archery?

Offline El Destructo

  • Member
  • Posts: 8,078
  • Longhaired Crippled Hippie Biker And Proud Of It!!
    • Desert Sportz Primitive Archery
Re: How Do You Process Beaver Tail?
« Reply #14 on: April 15, 2010, 08:35:51 pm »
Quote from: mullet on April 15, 2010, 08:12:22 pm
I've been restraining myself, Steve. :P ::) ;D ;)

Eat a Beaver....Save a Tree........................ ;D
Logged
As a species we're fundamentally insane. Put more than two of us in a room, we pick sides and start dreaming up ways to kill one another.Why do you think we invented politics and religion.
Think HEALTHCARE Is Expensive Now,Wait Till It's FREE
Do Or Do Not,There Is No TRY
2024...We Will Overcome
Pages: [1]
« previous next »