Author Topic: Maple board bow, one of three, not for BOM  (Read 3210 times)

0 Members and 1 Guest are viewing this topic.

Offline RyanY

  • Member
  • Posts: 1,999
Maple board bow, one of three, not for BOM
« on: March 14, 2010, 06:34:07 pm »
So I tried to make five bows this week but only ended up making three between other stuff. Its a maple board, 66" ntn 2" wide to mid limb tapering to 3/8" nocks. 50#@28". Took on about 1.5" in set.  This is the only one I took pics of but the other two are exactly the same except one is 68" ntn. A few comments. For the front view profile I wanted to make the tiller more elliptical but because I started a little thin near the handle it came out very circular. This is the best finish I've put on a bow. Just 4 coats of spar urethane. I'm really happy with how it came out. Shoots well and looks very simple and clean. I've been using hard maple a lot and its really grown on me. Easy to work, looks great, and pretty straight grain in boards which is why I picked it out in the first place. I'll try and take pics of the other two when I get time. I also have one more 68" one to make so I'll have two sets of twin bows. Let me know what ya think. Thanks for looking.










Offline KenH

  • Member
  • Posts: 247
  • The Kilted Cook
    • The Kilted Cook Personal Chef
Re: Maple board bow, one of three, not for BOM
« Reply #1 on: March 14, 2010, 06:56:08 pm »
Really nice.  Clean lines.  Elegant simplicity!
You Kill It - I Cook It!
Ken Hulme,
The Kilted Cook Personal Chef Service

Offline Pennhawk

  • Member
  • Posts: 140
Re: Maple board bow, one of three, not for BOM
« Reply #2 on: March 14, 2010, 07:33:07 pm »
Nice bow the braced profile looks good.

Offline sulphur

  • Member
  • Posts: 321
Re: Maple board bow, one of three, not for BOM
« Reply #3 on: March 14, 2010, 08:14:23 pm »
nice!  looks great.  the fades are a little more abrupt than i would like to see.  looks like a great shooter though.  your finish work is excellent.

Offline woodstick

  • Member
  • Posts: 899
Re: Maple board bow, one of three, not for BOM
« Reply #4 on: March 14, 2010, 08:29:44 pm »
looks good. i like to put a little stain on a board bow. but that is a great bow. good job.
a drawn bow is a stick 9/10 broken

half eye

  • Guest
Re: Maple board bow, one of three, not for BOM
« Reply #5 on: March 14, 2010, 09:09:32 pm »
I'm with Ken, nice, clean and it works......ought to be a great deer bow if you are into that.....ya cant go wrong with maple, good speed, tough wood and that bow will take a beatin for sure, especially here in Michigan
Rich

Offline George Tsoukalas

  • Member
  • Posts: 9,425
    • Traditional and Primitive Archers
Re: Maple board bow, one of three, not for BOM
« Reply #6 on: March 14, 2010, 09:10:23 pm »
The now's tiller is great. The only thing that concerns me is it looks like you cut through the back of the bow at the nock. It could break there. Jawge
Set Happens!
If you ain't breakin' you ain't makin!

Offline RG

  • Member
  • Posts: 493
Re: Maple board bow, one of three, not for BOM
« Reply #7 on: March 14, 2010, 09:15:01 pm »
Great job She ought to be a shooter

Ron

Offline Jmilbrandt

  • Member
  • Posts: 363
Re: Maple board bow, one of three, not for BOM
« Reply #8 on: March 14, 2010, 09:20:45 pm »
It looks good! The tiller is excellent. But I'm with sulfur the fades seem a little too abrupt and could be a weak spot.
SW Utah

Offline Frode

  • Member
  • Posts: 400
Re: Maple board bow, one of three, not for BOM
« Reply #9 on: March 14, 2010, 11:05:53 pm »
Very nice!  Maple sure is nice to work with, isn't it!?
Frode
If it doesn't rap the lintel, it might not be a longbow.

Offline RyanY

  • Member
  • Posts: 1,999
Re: Maple board bow, one of three, not for BOM
« Reply #10 on: March 14, 2010, 11:19:55 pm »
I definitely understand where you're coming from with the fades but I tried to get it so it didn't bend till the widest part of the limb. The built up handle is from the last six inches of the board which started out at 6' so I did have to keep it a little abrupt.

I didn't cut through the back of the bow at the nock but I think the string is pressing into the wood pretty hard. Didn't really feel like putting overlays on.

I do like staining my bows but I didn't want to buy new stain and the ones I have didn't do it for me. I like the creamyness of the maple but my concern is that if I hunted it would be too bright.

Thanks for the comments.  ;D

Offline El Destructo

  • Member
  • Posts: 8,078
  • Longhaired Crippled Hippie Biker And Proud Of It!!
    • Desert Sportz Primitive Archery
Re: Maple board bow, one of three, not for BOM
« Reply #11 on: March 14, 2010, 11:21:11 pm »
The Tiller turned out to look very nice...but them Fades are way too short...should have tapered to nothing by the Transition from Handle to Fades...not so abrupt at the ends of the Handle...also like Jawge pointed out...cutting them Nocks all the way around like that....can be a recipe for Disaster.....what little wood you did leave is not nearly enough...may as well be all the way around......good luck and I hope that you learned a bunch with these Bows...so you can use it all on the next ones that you build...and there will be many.... ;D
As a species we're fundamentally insane. Put more than two of us in a room, we pick sides and start dreaming up ways to kill one another.Why do you think we invented politics and religion.
Think HEALTHCARE Is Expensive Now,Wait Till It's FREE
Do Or Do Not,There Is No TRY
2024...We Will Overcome

Offline david w.

  • Member
  • Posts: 1,823
Re: Maple board bow, one of three, not for BOM
« Reply #12 on: March 15, 2010, 12:37:52 am »
Wow you did real good on that
These pretzels are making me thirsty.

if it dont go fast...chrome it - El Destructo

Offline NTProf

  • Member
  • Posts: 250
Re: Maple board bow, one of three, not for BOM
« Reply #13 on: March 15, 2010, 01:42:44 am »
Looks great. Maple is my favorite wood.

Offline Pappy

  • Global Moderator
  • Member
  • Posts: 32,204
  • if you have to ask you wouldn't understand ,Tenn.
Re: Maple board bow, one of three, not for BOM
« Reply #14 on: March 15, 2010, 08:26:27 am »
Great looking bow,love the wood,very nice. :)
  Pappy
Clarksville,Tennessee
TwinOaks Bowhunters
Life is Good