« previous next »
Pages: 1 [2]

Author Topic: Carrotwood Stave  (Read 5418 times)

0 Members and 1 Guest are viewing this topic.

Offline Parnell

  • Member
  • Posts: 5,556
Re: Carrotwood Stave
« Reply #15 on: January 29, 2010, 12:17:39 pm »
I found that carrotwood has a specific gravity of .53 (dry), so judging from the suggested widths in TBB1 a 66" bow pulling 50lb. should have 1.75" limbs.

My question is this - how would you guys go about correlating these widths if you were looking to make a bend in the handle bow?

I'm starting to wonder if I'm going to go for a semi-ridgid handle with this piece of wood.
« Last Edit: January 29, 2010, 12:49:20 pm by Parnell »
Logged
1’—>1’

Offline ohma

  • Member
  • Posts: 279
Re: Carrotwood Stave
« Reply #16 on: January 29, 2010, 12:47:01 pm »
parnell keep the pics comin. thats some pretty wood.
Logged
if your not dead you are getting older so get out and shoot some arrows.

Offline Jude

  • Member
  • Posts: 286
  • Julian Benoit, Black River, NY & Kandahar, Afghan.
Re: Carrotwood Stave
« Reply #17 on: January 30, 2010, 04:35:56 am »
Does it darken up over time?  The unsplit trunk looked pretty dark orangy-brown, but once you reduced it, it looks almost gray.
Logged
"Not all those that wander are lost."--Tolkien
"If at first you don't succeed, get a bigger hammer."--Benoit

Offline Parnell

  • Member
  • Posts: 5,556
Re: Carrotwood Stave Crunch!
« Reply #18 on: February 02, 2010, 07:29:22 pm »
Well, I was trying to take some of the deflex out of one of the limbs to even it up and it just didn't want to take it.  It cracked both on the back and belly. I'm convinced that this wood is doable but it will take a straight piece.  I have a few that I'll work on again.

Here are some pictures...

[attachment deleted by admin]
Logged
1’—>1’
Pages: 1 [2]
« previous next »