« previous next »
Pages: [1]

Author Topic: starting a bow  (Read 3885 times)

0 Members and 1 Guest are viewing this topic.

Offline broketooth

  • Member
  • Posts: 102
starting a bow
« on: February 09, 2010, 04:30:08 pm »
this is a stave that i started last summer. it is 671/2" long,1/38" wide for 2/3 of its length and tapers to 5/8 wide at the tips.  the limb that is straight has a few small knots and pins. the limb with the snakey grain has a big knot right in the center of the limb about 3" down from the fade area and a knot in the snakey part. accoring to mr pats advice, osage likes to be round so when you look at the end profile of each limb it has a convex profile. this stave has been sitting in my attic since last fall, about sept. , if i recall correctly. well ive been board so i retreived it from the attic 2 days ago and scraped on the limbs until the convex shape. both limbs are starting to bend nicely ( floor tiller) here is what i got so far/broketooth/ruddys1stbowbuild001.jpg[/IMG]back of bowside profilebelly side snakey limb belly side straight limb snakey limb closeup. tell me what ya think so far
Logged

Offline broketooth

  • Member
  • Posts: 102
Re: starting a bow
« Reply #1 on: February 09, 2010, 04:35:14 pm »
here is the stave full lenght
Logged

Offline Josh

  • Member
  • Posts: 3,367
  • Silence is golden but duct tape is silver.
Re: starting a bow
« Reply #2 on: February 09, 2010, 05:29:36 pm »
looks good, can't wait to see it racked!  -josh
Logged
“The trouble with quotes on the Internet is you never know if they are genuine.” —Abraham Lincoln

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: starting a bow
« Reply #3 on: February 09, 2010, 05:30:16 pm »
Well, what are you waiting on Ruddy. Get busy!  ;D  Looks like a pretty good stave. The knot shouldn't be a problem. How are the growth rings?
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline broketooth

  • Member
  • Posts: 102
Re: starting a bow
« Reply #4 on: February 09, 2010, 06:04:31 pm »
mr pat, this is the belly split i told you about. it came from a bigger peice. the person who got it for me ,told me i could possibly get 2 bows out of it
Logged

Offline broketooth

  • Member
  • Posts: 102
Re: starting a bow
« Reply #5 on: February 09, 2010, 06:13:22 pm »
here is a pic of each limb@ floor tillersnakey limb, the other limb
Logged

Offline broketooth

  • Member
  • Posts: 102
Re: starting a bow
« Reply #6 on: February 10, 2010, 03:50:04 pm »
today a made a small tiller stick and a long string with some boots. i have the stave flexed about 3 1/2"<a href="http://s602.photobucket.com/albums/tt101/broketooth/?action=view&current=ruddys1stbowbuild011.jpg" target="_blank"><img src="http://i602.photobucket.com/albums/tt101/broketooth/ruddys1stbowbuild011.jpg" border="0" alt="Photobucket"></a> what do you see that i need to do
Logged

Offline broketooth

  • Member
  • Posts: 102
Re: starting a bow
« Reply #7 on: February 10, 2010, 03:52:57 pm »
 the limb on the left is the snakey limb. i think it needs to bend near the fade more. the straight limb on the right needs to bend more at mid limb. opinions?
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: starting a bow
« Reply #8 on: February 10, 2010, 03:57:21 pm »
Ruddy, Stay away from mid limb on both for a while. Concentrate a bit near the fades and more out towards the outer limbs. Leave the last 6" of each tip stiff.   Seems to becoming along pretty good. Take it slow and exercise the limbs after each wood removal.    A tiller stick can put too much strain on an uneducated limb. Don't leave it on the stick long.  Also, make your long string just long enough to reach each tip. I can't see your last pic.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline broketooth

  • Member
  • Posts: 102
Re: starting a bow
« Reply #9 on: February 10, 2010, 04:41:07 pm »
Logged
Pages: [1]
« previous next »