« previous next »
Pages: [1]

Author Topic: Noob Lamination question  (Read 1713 times)

0 Members and 1 Guest are viewing this topic.

Offline Aries

  • Member
  • Posts: 493
Noob Lamination question
« on: December 23, 2009, 12:13:26 pm »
lamination noob question ::).....              Do i glue bamboo to the tapered side of my ipe or the flat side?
i was sittin down to start to work last night, and realized i wasn't 100% sure. I am bettin its flat side.  Ty
Logged
"If the only tool you have is a hammer,
                   you tend to see every problem as a nail."
                               ~Abraham Maslow

Offline markinengland

  • Member
  • Posts: 698
Re: Noob Lamination question
« Reply #1 on: December 23, 2009, 12:20:36 pm »
Aries,
The bamboo goes onto the back of the bow, the sides which is away from you when the bow is shot. Usually this is flat to alow the flat backing to be glued on.
Logged

Offline Justin Snyder

  • Administrator
  • Member
  • Posts: 13,794
Re: Noob Lamination question
« Reply #2 on: December 23, 2009, 12:22:26 pm »
It needs to be flat enough for the bamboo to fit to it, but doesn't have to be straight and flat from end to end.  I usually taper mine on both sides.
Logged
Everything happens for a reason, sometimes the reason is you made a bad decision.


SW Utah
Pages: [1]
« previous next »