« previous next »
Pages: [1]

Author Topic: Question on pacific dogwood  (Read 1684 times)

0 Members and 1 Guest are viewing this topic.

Offline Dave 55

  • Member
  • Posts: 243
Question on pacific dogwood
« on: November 20, 2009, 12:47:45 pm »
Ive got a dogwood stave that is fairly narrow but highly crowned,almost oval on the back,I was considering making a 64 inch flatbow,17/8 wide to midlimb but with such high crown I am unsure how to lay it out.Im looking for 65 to 70# at 26 inches any thoughts would be appreciated,Dave.
Logged
Now is the good old days

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,911
  • Eddie Parker
Re: Question on pacific dogwood
« Reply #1 on: November 20, 2009, 12:52:44 pm »
 I've got one I have had for about 6 years, Dave. It has a high crown also. I was told to make it 2-17/8" wide and leave the belly flat. Then just round the edges. Mine is layed out, 2" at the fades and taperes down the last 1/3 to 1/2" tips. I was going to make a semi, bend in the handle bow. It is 66" T-T.
Logged
Lakeland, Florida
 If you have to pull the trigger, is it really archery?

Offline Dave 55

  • Member
  • Posts: 243
Re: Question on pacific dogwood
« Reply #2 on: November 20, 2009, 01:14:23 pm »
Thanks Eddie I appreciate,Ive shot the osage you made quite a bit and no string follow,a great shooting bow.
Logged
Now is the good old days
Pages: [1]
« previous next »