« previous next »
Pages: [1]

Author Topic: Mulberry stave  (Read 1607 times)

0 Members and 1 Guest are viewing this topic.

Offline Dave 55

  • Member
  • Posts: 243
Mulberry stave
« on: October 20, 2009, 01:48:25 pm »
Ive got a question on a mulberry stave I recieved,part of the bark was missing and it has about a 5 inch check that goes right down the middle and at least 3/4 inch into the heartwood,would I be better off decrowning it and trying to chase a ring that way?Any advice is appreciated.Also  I would have to add on a grip if I did it that way.
Logged
Now is the good old days

Offline Dano

  • Member
  • Posts: 1,349
Re: Mulberry stave
« Reply #1 on: October 20, 2009, 01:57:37 pm »
I'd treat Mulberry just like osage, chase a ring of heartwood, and dimensions should be close.
Logged
"If the women don't find you handsome, they should at least find you handy."


Nevada

radius

  • Guest
Re: Mulberry stave
« Reply #2 on: October 20, 2009, 02:00:15 pm »
i guess it's not long enough to just buck that checked part off?
Logged

Offline Dave 55

  • Member
  • Posts: 243
Re: Mulberry stave
« Reply #3 on: October 20, 2009, 04:01:50 pm »
Thanks for the reply guys,Ill chase it down past the check,patience is a virtue I sometimes have a hard time holding onto tho sorely needed when it comes to making a decent bow.
Logged
Now is the good old days

Offline Dano

  • Member
  • Posts: 1,349
Re: Mulberry stave
« Reply #4 on: October 20, 2009, 04:28:25 pm »
Like some one once said, Patience is the most important tool in bow making.
Logged
"If the women don't find you handsome, they should at least find you handy."


Nevada
Pages: [1]
« previous next »