« previous next »
Pages: [1]

Author Topic: So how do you cut antler to mount.....  (Read 18313 times)

0 Members and 1 Guest are viewing this topic.

Offline part Cherokee

  • Member
  • Posts: 110
  • aNiKaWi
So how do you cut antler to mount.....
« on: September 02, 2009, 08:25:29 pm »
Osiyo!!
 I luv this part of the site you guys are so  talented!!
I was wondering whats the best way to cut antler to mount a flint knife blade. Will a hacksaw work?
What kind of adhesive do you guys use. I might use this knife so whats durable.
wado
donadagohvi
White Fox
Logged
OsiYo Tsalagi

Offline nugget

  • Member
  • Posts: 1,995
  • I see, I hunt, I shoot, I eat
Re: So how do you cut antler to mount.....
« Reply #1 on: September 02, 2009, 08:33:23 pm »
I use homeade pine pitch glue to mount mine. If all alse fails you can always use epoxy.  As far as cutting the horn, use what works best for you. I have used a hacksaw, bandsaw, drills, and files. Don'tget to wrap it with sinew after glueing.
Good luck and post pics when done.
TJ
Logged
Life is not a journey to the grave with the intentions of arriving safely in a pretty and well preserved body. But rather to slide in sideways, thoroughly used up, totally worn out and loudly proclaiming....WOW WHAT A RIDE!!

Offline Jaeger

  • Member
  • Posts: 238
Re: So how do you cut antler to mount.....
« Reply #2 on: September 02, 2009, 08:40:12 pm »
an angle grinder works very well ,not too primitive though.
Logged

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,911
  • Eddie Parker
Re: So how do you cut antler to mount.....
« Reply #3 on: September 02, 2009, 09:07:49 pm »
 Before I had a bandsaw I used a hacksaw and files to make the slot fit tight. If you want it to fit real tight, cut the slot close and then boil it real good. Then put the blade in and lightly clamp. Squeezing it gently untill it is tight and  cools down, then glue and wrap it with sinew.

  I either glue it with epoxy or TB3 and then cover it with pitch, look's authenic and holds better. ;)
Logged
Lakeland, Florida
 If you have to pull the trigger, is it really archery?

Offline part Cherokee

  • Member
  • Posts: 110
  • aNiKaWi
Re: So how do you cut antler to mount.....
« Reply #4 on: September 02, 2009, 10:43:32 pm »
Hey thanks guys!!! Ill post pics when done Rickd is sending me some antlers.
wado
Matt
Logged
OsiYo Tsalagi

Offline recurve shooter

  • Member
  • Posts: 2,325
Re: So how do you cut antler to mount.....
« Reply #5 on: September 02, 2009, 10:57:08 pm »
good luck man. what is your blade made of?
Logged
lets just shoot it

Offline sailordad

  • Member
  • Posts: 5,045
Re: So how do you cut antler to mount.....
« Reply #6 on: September 02, 2009, 11:48:24 pm »
i have used hack saw,or dremel or bandsaw ro gut antler or wood for handles
i use pine pitch and sinew when making a primitive style knife,but i use epoxy when i want a more modern looking stome knife
Logged
i always wanted a harley,untill it became the "thing to ride"
i ride because i love to,not to be part of the crowd

Offline Bill Skinner

  • Member
  • Posts: 384
Re: So how do you cut antler to mount.....
« Reply #7 on: September 04, 2009, 07:58:16 am »
You can soak it in water for three or four days.  The bigger the antler, the longer you need to soak it.  It will get pretty soft, and can easily be worked with stone tools.  It will also smell like dead meat, the smell will go away as soon as it dries out.  Bill
Logged
Pages: [1]
« previous next »