« previous next »
Pages: [1]

Author Topic: question on a deflexed handle  (Read 2085 times)

0 Members and 1 Guest are viewing this topic.

Offline ravenbeak

  • Member
  • Posts: 333
  • Pacific Yew Wood
    • Ravenbeak Natureworks
question on a deflexed handle
« on: August 13, 2009, 03:59:16 pm »
I just bent some recurves into a stave i am working on with the heat gun , and they came out a bit bigger than i was expecting.    the bow will bend through the handle,  but what would you think about inducing a deflex into the handle to help stabilize the bow.  or would you just proceed to tiller as normal assuming that some of the recurve will be pulled out with time.   


thanks,
jamie
Logged
Custom Yew Bows,  and bow making workshops
www.ravenbeak.com

Offline Dano

  • Member
  • Posts: 1,349
Re: question on a deflexed handle
« Reply #1 on: August 13, 2009, 05:05:22 pm »
I don't know what wood your using, but most self recurves will induce deflex on their own, I call it set. If the recurves are working, you need to get them working first, before you flex mid limb. Marc and Ryan make some great recurves, I'd get their advice.
Logged
"If the women don't find you handsome, they should at least find you handy."


Nevada

Offline Chadwick

  • Member
  • Posts: 161
  • Knock off everything that ain't a bow.
    • Primal Archery
Re: question on a deflexed handle
« Reply #2 on: August 13, 2009, 05:08:22 pm »
I wouldn't induce deflex in the handle.... a bend-in the handle bow will introduce its own stability. You'll get your string follow and see that it's stable.
Logged
Nothing flying, Nothing dying

radius

  • Guest
Re: question on a deflexed handle
« Reply #3 on: August 15, 2009, 01:57:14 pm »
Jamie!  Where ya been, man??  We should get together for a shoot...and hey, lessee some pics of this new one...
Logged
Pages: [1]
« previous next »