« previous next »
Pages: 1 ... 19 20 [21] 22 23 24

Author Topic: Northern Community Bow  (Read 149015 times)

0 Members and 1 Guest are viewing this topic.

Offline Justin Snyder

  • Administrator
  • Member
  • Posts: 13,794
Re: Northern Community Bow
« Reply #300 on: May 12, 2007, 08:33:46 pm »
Take the weight you want (40) and divide it by the weight you have (35).  The amount after the decimal is the percent you want to increase. Divide that by 5 and that is the percent of limb you want to cut off.  Times that by the length of the bow and that is how much you want to cut off. 40/35=1.1428    .1428/5=.0285   .0285X61=1.74   To increase a 61" bow from 35 to 40 you would cut off 1.75" or 7/8" off each limb.  Justin
Logged
Everything happens for a reason, sometimes the reason is you made a bad decision.


SW Utah

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Northern Community Bow
« Reply #301 on: May 12, 2007, 09:00:53 pm »
Thats what I meant to say! ::)    Pat
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Gordon

  • Member
  • Posts: 3,299
Re: Northern Community Bow
« Reply #302 on: May 12, 2007, 09:11:06 pm »
The bow pulled 42# when it was 65". I expect it will be close to 50# when I'm done (I hope).
Logged
Gordon

Offline Justin Snyder

  • Administrator
  • Member
  • Posts: 13,794
Re: Northern Community Bow
« Reply #303 on: May 12, 2007, 11:33:36 pm »
I can reverse it too Gordon. It now pulls 54.9# being 61".   ;D Did I mention I like math.  Justin
Logged
Everything happens for a reason, sometimes the reason is you made a bad decision.


SW Utah

Offline Gordon

  • Member
  • Posts: 3,299
Re: Northern Community Bow
« Reply #304 on: May 13, 2007, 01:12:26 am »
Justin, I am anxious to see how accurate your formula is. Should know by tomorrow.
Logged
Gordon

Offline DanaM

  • Member
  • Posts: 9,211
Re: Northern Community Bow
« Reply #305 on: May 13, 2007, 07:32:49 am »
Justin, I would never have figured ya for a math geek ;D

DanaM
Logged
"Prosperity is a way of living and thinking, and not just money or things. Poverty is a way of living and thinking, and not just a lack of money or things."

Manistique, MI

Offline Justin Snyder

  • Administrator
  • Member
  • Posts: 13,794
Re: Northern Community Bow
« Reply #306 on: May 13, 2007, 12:27:52 pm »
Yes Dana, most people just figure me for a geek.  Justin
Logged
Everything happens for a reason, sometimes the reason is you made a bad decision.


SW Utah

Offline GregB

  • Member
  • Posts: 4,079
  • Greg Bagwell
Re: Northern Community Bow
« Reply #307 on: May 13, 2007, 02:32:54 pm »

While Justin, I'm impressed...where did you get all them smarts from? ;D

Logged
Greg

A rich person can be poor monetarily, the best things in life are free...

Offline stiknstring

  • Member
  • Posts: 376
Re: Northern Community Bow
« Reply #308 on: May 14, 2007, 04:54:10 pm »
That formula was either in the traditional bowyers bible or in paul comstocks "The Bent Stick"  I cannot remember for sure but its there for everyone.
Logged

Offline Justin Snyder

  • Administrator
  • Member
  • Posts: 13,794
Re: Northern Community Bow
« Reply #309 on: May 14, 2007, 06:26:21 pm »
Like Stan said, it is in TBB 1. It is in the tillering section.  Justin
Logged
Everything happens for a reason, sometimes the reason is you made a bad decision.


SW Utah

Offline Ryano

  • Member
  • Posts: 3,578
  • Ryan O'Sullivan, North Western Pennsylvania
Re: Northern Community Bow
« Reply #310 on: May 15, 2007, 11:08:51 pm »
Any news Gordon? Hows it looking?
Logged
Its November, I'm gone hunt'in.......
Osage is still better.....

Offline Gordon

  • Member
  • Posts: 3,299
Re: Northern Community Bow
« Reply #311 on: May 16, 2007, 01:48:46 am »
Ryan, I piked the bow and put on new tips. The draw weight has definitely increased, but the tiller is still off so I didn't take it to full draw. I'll be traveling on business the rest of the week but I intend to fix the tiller this weekend. And then I will put on the finish.
Logged
Gordon

Offline Ryano

  • Member
  • Posts: 3,578
  • Ryan O'Sullivan, North Western Pennsylvania
Re: Northern Community Bow
« Reply #312 on: May 16, 2007, 10:00:54 am »
Great!
Logged
Its November, I'm gone hunt'in.......
Osage is still better.....

Offline Gordon

  • Member
  • Posts: 3,299
Re: Northern Community Bow
« Reply #313 on: May 19, 2007, 05:47:47 pm »
Alright, the bow has been piked, new tips installed, tiller evened and the bow finish sanded. She came in at 48# @ 28".

We're back in the game boys!

 I'll post some pics a little later today.

Gordon
Logged
Gordon

Offline Gordon

  • Member
  • Posts: 3,299
Re: Northern Community Bow
« Reply #314 on: May 19, 2007, 07:14:10 pm »
Okay, here are some pictures to whet your appetite:






Logged
Gordon
Pages: 1 ... 19 20 [21] 22 23 24
« previous next »