Author Topic: Southern Community Bow  (Read 211256 times)

0 Members and 1 Guest are viewing this topic.

bullcreekboy

  • Guest
Re: Southern Community Bow
« Reply #300 on: February 28, 2007, 11:36:12 pm »
Thanks Pat. I am expecting the bow any day. I will get to work on it ASAP when I recieve it.

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Southern Community Bow
« Reply #301 on: March 01, 2007, 12:10:41 am »
Shannon, It will take about 7' to do a 4" handle. The 2 pieces I sent should make 4 handle wraps. Work with the whole piece to be sure you have enough to complete the handle wrap. A splice in the handle doesn't look or feel good. Let me know if you need help.   Pat
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

bullcreekboy

  • Guest
Re: Southern Community Bow
« Reply #302 on: March 01, 2007, 08:06:04 am »
Pat you are too generous.  ;D Now I owe you something. LOL

Dustybaer

  • Guest
Re: Southern Community Bow
« Reply #303 on: March 03, 2007, 05:58:00 pm »
didn't have much time lately, but today i added a little gimmick to the hood.

[attachment deleted by admin]

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Southern Community Bow
« Reply #304 on: March 03, 2007, 06:02:04 pm »
Cool Marius.   Pat
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline cowboy

  • Member
  • Posts: 7,035
  • Paul Wolfe. Springtown, TX
Re: Southern Community Bow
« Reply #305 on: March 03, 2007, 09:48:47 pm »
That's a nice touch Marius! Kinda like a community makers mark, whoever buys the rig - if they don't become a subscriber will always have a reminder of where it came from.
When you come upon a track or trail you do not know, follow it to the point of knowing.

Offline GregB

  • Member
  • Posts: 4,079
  • Greg Bagwell
Re: Southern Community Bow
« Reply #306 on: March 05, 2007, 06:24:22 pm »

How's that bow coming Shannon? ;)
Greg

A rich person can be poor monetarily, the best things in life are free...

bullcreekboy

  • Guest
Re: Southern Community Bow
« Reply #307 on: March 05, 2007, 07:39:19 pm »
I think the post office has lost it.  >:( Skeaterbait has a tracking number that I tried but it doesn't tell anything other than he dropped it off at the post office. Skeater was out of town on a hunt last week so I called the post office and they gave me the run around. He is going to stop by there tomorrow and rattle their cage a little.  ;D As soon as I get it I will start on it. I hope it arrives soon. My free time is about to come to a stand still.
« Last Edit: March 05, 2007, 07:41:26 pm by bullcreekboy »

Offline GregB

  • Member
  • Posts: 4,079
  • Greg Bagwell
Re: Southern Community Bow
« Reply #308 on: March 05, 2007, 10:03:19 pm »

I hope it's not loss! I was expecting to see some of your magic performed on it by now. ;)
Greg

A rich person can be poor monetarily, the best things in life are free...

Offline Justin Snyder

  • Administrator
  • Member
  • Posts: 13,794
Re: Southern Community Bow
« Reply #309 on: March 06, 2007, 12:37:14 am »
Hey Pat, I got the arrows today.  I'm thinking horn reinforced knocks on the ones with obsidian points and spined guava on the practice arrows.  What do you guys think. 

Marius, I like that quiver, she is beautiful.   Justin
Everything happens for a reason, sometimes the reason is you made a bad decision.


SW Utah

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Southern Community Bow
« Reply #310 on: March 06, 2007, 12:46:10 am »
Good! Your suggestions sounds good.  The buffalo nut shafts have a large pith that will probably have to be plugged. It is tough stuff but will split lengthwise. If it does split, a little super glue and a wrap will fix it. Until they are finished, the spine can be adjusted by scraping or sanding along the middle of the shaft. Also for every inch over 28" you can subtract 5# of spine weight and the natural taper of the shafts can give 10# or so of reduced spine weight.   Pat

ps. The heads aren't obsidian. Cowboy knows what they are.   
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Justin Snyder

  • Administrator
  • Member
  • Posts: 13,794
Re: Southern Community Bow
« Reply #311 on: March 06, 2007, 01:01:55 am »
;D ;D I didn't mean obsidian, I meant stone.  You can tell what kind of stone I have access to.  Justin
Everything happens for a reason, sometimes the reason is you made a bad decision.


SW Utah

Offline Pappy

  • Global Moderator
  • Member
  • Posts: 32,204
  • if you have to ask you wouldn't understand ,Tenn.
Re: Southern Community Bow
« Reply #312 on: March 06, 2007, 06:09:17 am »
Looks like every thing is coming along nicely,great job to all,so far. :)
   Pappy
Clarksville,Tennessee
TwinOaks Bowhunters
Life is Good

bullcreekboy

  • Guest
Re: Southern Community Bow
« Reply #313 on: March 06, 2007, 11:04:57 am »
I have some good news. The tracking number shows that it arrived in town this morning so I should have it this afternoon.  ;D

Offline GregB

  • Member
  • Posts: 4,079
  • Greg Bagwell
Re: Southern Community Bow
« Reply #314 on: March 06, 2007, 02:11:43 pm »

Outstanding! Looking forward to see it after you get through, know you'll do a great job! ;)
Greg

A rich person can be poor monetarily, the best things in life are free...