« previous next »
Pages: [1]

Author Topic: billets  (Read 2023 times)

0 Members and 1 Guest are viewing this topic.

Offline Jaeger

  • Member
  • Posts: 238
billets
« on: July 12, 2009, 04:37:20 pm »
I have saw billets out of antler and copper and wood ,I wanted  to know if a brass billet will work?
Logged

Offline piper

  • Member
  • Posts: 344
Re: billets
« Reply #1 on: July 12, 2009, 07:32:11 pm »
most any thing will work  But some thing work better..Like Copper...... Brass works good for sparling.

  Curt
Logged
It's hard to ride two horses when you only have one ass

                     Western North Carolina

Offline billy

  • Member
  • Posts: 1,233
Re: billets
« Reply #2 on: July 12, 2009, 11:42:34 pm »
yeah, I think brass works just fine.  It's a bit harder than copper, but it should work, although I've never tried it.  I have seen brass hammers and billets in other people's toolkits though.
Logged
Marietta, Georgia

Offline Hillbilly

  • Member
  • Posts: 8,248
  • I like tater tots.
Re: billets
« Reply #3 on: July 13, 2009, 07:31:29 am »
I've used a big chunk of brass to spall before, but it's too hard and slick to make a good billet for general knapping.
Logged
Smoky Mountains, NC

NeolithicHillbilly@gmail.com

Progress might have been all right once but it's gone on for far too long.
Pages: [1]
« previous next »