Author Topic: How about a Texas Point  (Read 2299 times)

0 Members and 1 Guest are viewing this topic.

Offline Outbackbob48

  • Member
  • Posts: 2,752
How about a Texas Point
« on: July 11, 2009, 05:59:29 pm »
It  started raining in Penna. again, so I broke into my supply of Texas rock that I got from Eric. Seemed to work just fine. Later Bob

[attachment deleted by admin]

Offline nugget

  • Member
  • Posts: 1,995
  • I see, I hunt, I shoot, I eat
Re: How about a Texas Point
« Reply #1 on: July 11, 2009, 06:02:19 pm »
Nice, I like it
Life is not a journey to the grave with the intentions of arriving safely in a pretty and well preserved body. But rather to slide in sideways, thoroughly used up, totally worn out and loudly proclaiming....WOW WHAT A RIDE!!

Offline cowboy

  • Member
  • Posts: 7,035
  • Paul Wolfe. Springtown, TX
Re: How about a Texas Point
« Reply #2 on: July 11, 2009, 07:53:24 pm »
Oooh, that looks like some of that tough TX perd. Most of those are real character builders - nice point :).
When you come upon a track or trail you do not know, follow it to the point of knowing.

Offline Timo

  • Member
  • Posts: 2,026
Re: How about a Texas Point
« Reply #3 on: July 11, 2009, 09:54:03 pm »
Yea that looks like perd, I heat all that stuff and it makes it mucho better! Nice job on that one! ;)

Offline Outbackbob48

  • Member
  • Posts: 2,752
Re: How about a Texas Point
« Reply #4 on: July 11, 2009, 10:01:14 pm »
Timo, How much heat an how long, an I,m assuming bigger stuff needs to be spalled. Thanks Bob

Offline Timo

  • Member
  • Posts: 2,026
Re: How about a Texas Point
« Reply #5 on: July 11, 2009, 10:08:46 pm »
Everyones kilns are different, but mine runs it best @ 350 to 375 degrees with no hold time. Be sure and keep an eye on it for if you go over 400 you have ruined you Texas rock.

Offline redwasp

  • Member
  • Posts: 222
Re: How about a Texas Point
« Reply #6 on: July 12, 2009, 12:44:27 am »
I got some of that from eric. a whole bucket full. looks a little different though. nice work Bob. Richard..
If one man can do it, another man can do it. Richard......Northeastern PA.