Primitive Archer
Welcome,
Guest
. Please
login
or
register
.
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
Home
Help
Search
Calendar
Login
Register
Primitive Archer
»
Main Discussion Area
»
Arrows
»
sinew coming loose
« previous
next »
Print
Pages: [
1
]
Author
Topic: sinew coming loose (Read 2984 times)
0 Members and 1 Guest are viewing this topic.
deersled
Member
Posts: 57
sinew coming loose
«
on:
May 25, 2009, 12:32:11 pm »
how do you prevent the sinew that is wrapped at the base of your nock from shredding? After I shoot for a while the sinew starts to come loose. I guess it is from your fingers rubbing when you shoot.
Logged
sonny
Member
Posts: 742
Re: sinew coming loose
«
Reply #1 on:
May 25, 2009, 12:47:56 pm »
glue it down sufficiently in the first place, then apply some beeswax over it after the glue has dried.
Logged
Never argue with an idiot. They'll drag you down to their level and beat you with experience.
Pat B
Administrator
Member
Posts: 37,633
Re: sinew coming loose
«
Reply #2 on:
May 25, 2009, 02:06:48 pm »
When I seal sinew wrapping with super glue or TBIII. On primitive arrows I use pine pitch varnish. If necessary, all of these can be re-applied if the sinew(or thread) wrap begins to ravel.
Logged
Make the most of all that comes and the least of all that goes! Pat Brennan Brevard, NC
deersled
Member
Posts: 57
Re: sinew coming loose
«
Reply #3 on:
May 25, 2009, 05:00:45 pm »
gotcha! thanks
Logged
Pat B
Administrator
Member
Posts: 37,633
Re: sinew coming loose
«
Reply #4 on:
May 26, 2009, 07:11:44 pm »
I chew the sinew before I apply it to soften it. Saliva and the sinew makes it's own glue. Once down, it stays put unless I abuse it. That's why I usually seal it with super glue, TBIII or pitch varnish to prevent it from unraveling with abuse and to protect against moisture.
Logged
Make the most of all that comes and the least of all that goes! Pat Brennan Brevard, NC
George Tsoukalas
Member
Posts: 9,425
Re: sinew coming loose
«
Reply #5 on:
May 27, 2009, 11:16:25 pm »
I wet the sinew, use it for the wrapping, coat with hide glue and after it dries I seal with pine pitch. Jawge
Logged
Set Happens!
If you ain't breakin' you ain't makin!
billy
Member
Posts: 1,233
Re: sinew coming loose
«
Reply #6 on:
June 06, 2009, 01:03:16 am »
On your last wrap of sinew just tuck the sinew under itself. Pull it tight, cut off the excess, and let it dry. If done right it will almost never come loose. And I do like Pat does....I chew it well to make sure it's fully hydrated. Also, I gently score the area where the sinew wraps will be with a stone knife....that helps give the sinew something to grip when it dries. I've seen that same scoring under sinew wraps of real indian arrows in the Smithsonian when I examined their collection 2 years ago.
Logged
Marietta, Georgia
Bullitt
Member
Posts: 205
Re: sinew coming loose
«
Reply #7 on:
June 06, 2009, 12:59:50 pm »
Steal some finger nail polish from the wife, works great. And like others said pitch, s.g., poly, or any othe finish works good also! Good Shootin, Steve
Logged
mullet
Global Moderator
Member
Posts: 22,911
Eddie Parker
Re: sinew coming loose
«
Reply #8 on:
June 06, 2009, 04:39:56 pm »
I soak my sinew in a bowl of warm water with a squirt of TB3 in it. I apply it and then put a film of glue over it when it dries. I quit chewing sinew when CWD was found in deer, a good way to transfer some DNA.
Logged
Lakeland, Florida
If you have to pull the trigger, is it really archery?
Print
Pages: [
1
]
« previous
next »
Primitive Archer
»
Main Discussion Area
»
Arrows
»
sinew coming loose