« previous next »
Pages: [1]

Author Topic: heating boo  (Read 1913 times)

0 Members and 1 Guest are viewing this topic.

Offline chessieboy

  • Member
  • Posts: 184
heating boo
« on: August 14, 2009, 09:34:53 am »
I remember reading about someone who heated boo after it was glued up.  My boo is real light almost white colored and I want to darken it but I'm afraid that the heat will affect the glue.  I used smoothon and its Ipe and boo.  Any thoughts?  Should I let this one alone and heat the toast the boo on my next one first then apply or will toasting the boo slightly not raise the temp enough to affect the glue?
Logged

Offline aaron

  • Member
  • Posts: 1,037
Re: heating boo
« Reply #1 on: August 14, 2009, 10:32:24 am »
you could darken it with stain- i used threerivers alchohol based stain on my boo3
Logged
Ilwaco, Washington, USA
"Good wood makes great bows, but bad wood makes great bowyers"

Russell Aradine

  • Guest
Re: heating boo
« Reply #2 on: August 16, 2009, 11:49:48 pm »
Used Rite dye with denatured alcohol.  Works fine.

Good luck,

Russell
Logged

Offline knightd

  • Member
  • Posts: 1,392
    • www.primalneedarchery.com
Re: heating boo
« Reply #3 on: August 17, 2009, 12:02:07 am »
Not saying it cant be done.. But I would not try it on a backing strip allready glued up..
Logged
Pages: [1]
« previous next »